Electronics Forum | Wed May 30 21:16:05 EDT 2001 | davef
MPM AP-27 preferred over MPM AP-20 The issue is release of paste from the stencil. A vertical lift printer kinda snaps the stencil away from the board to complete the print cycle. The inertia and the rheometric properties of the paste make it rele
Electronics Forum | Tue Aug 24 17:01:33 EDT 2021 | demradarmfg
Hello, Context: My company is a high mix, low volume OEM. We recently acquired a used EKRA XPRT3 stencil printer. We only have a total of 3 Manufacturing Engineers in the building, and I, one of them, am assigned as the our SMT assembly process engi
Electronics Forum | Mon Nov 06 14:00:45 EST 2006 | nodlac
Checks calendar ...nope not April 1st. -The fresher the paste the better the solder joint. Agreed - My dilema here is upper management wants the two lines to share one stencil printer thus saving the cost of purchasing a second printer. They propos
Electronics Forum | Fri Aug 28 05:07:59 EDT 2009 | sachu_70
Do you clean the stencil manually or using the automated under-stencil cleaner on your Printer (recommended)? 1. Ensure that stencil wipes are lint-free and soaked sufficiently with solvent before use. 2. If your printer supports automated cleaning
Electronics Forum | Fri Feb 27 09:14:40 EST 2004 | cyber_wolf
To simplify; Can I take a 20X20 stencil with a centered image off my shelf and drop it into a DEK printer. OR...Does DEK require a special stencil like Fuji's do ?
Electronics Forum | Fri Apr 29 17:49:22 EDT 2005 | Woodsmt
I have used many of these devices recently and have used them several times over the last few years. I have been successful using a type 4 paste on a 5 mil stencil. The 13 mil round aperture should provide you with an area ratio just adequate for r
Electronics Forum | Fri Apr 29 17:49:26 EDT 2005 | Woodsmt
I have used many of these devices recently and have used them several times over the last few years. I have been successful using a type 4 paste on a 5 mil stencil. The 13 mil round aperture should provide you with an area ratio just adequate for r
Electronics Forum | Tue Feb 10 17:38:22 EST 2015 | mbartel
low volume high mix, looking for advice on what i should get, a stencil machine or a jet printer for smt solder paste. used/new and companies i should look into?
Electronics Forum | Thu Feb 18 17:49:28 EST 1999 | Ryan Jennens
Hey all- My question is this: My stencil printer operator has said that he has to wipe our 6-mil stencil each pass to get the paste in the 20-mill pitch aperatures for a QFP to release well. We are using Amtech NC-559 type 3 paste with 89.5% metal
Electronics Forum | Fri Jun 18 17:38:25 EDT 2021 | clabra
!!!Does anyone know where i can get a parts catalog or spare parts for a Ekra Screen Printer specifically a bottle that i would fill with solution to clean the stencils the bottle is located on the back of the printer!!!!
