Electronics Forum | Mon May 30 06:36:16 EDT 2011 | mbnetto
This is a requested point from some customers. It's part of the audit check points. But I agree it´s important for the process. You can garantee the stencil is in a good condition after many time using it. If your stencil looses the tension, you can
Electronics Forum | Fri May 27 13:19:43 EDT 2011 | scouser9751
contact Tom Desistofrom Four Points. They have developed one
Electronics Forum | Thu Jun 02 07:13:43 EDT 2011 | cyber_wolf
Things of this nature make us raise an eyebrow. Something along the lines of automatic solder paste mixers......
Electronics Forum | Thu May 26 13:48:34 EDT 2011 | jorge_quijano
I used this for a couple of weeks some years ago, I was able to detect some issues whith some stenciles, but I did not use it for a long time, it may help you.
Electronics Forum | Mon Dec 01 02:54:05 EST 2014 | divia
Yes nano coating giving the good printing, but the stencil tension is very important for the life, 1st ensure the stencil tension...
Electronics Forum | Tue Mar 16 09:03:33 EST 1999 | Dave F
| Thanks Dave, | | But still I have the following question unanswered, in a technical point of view: | Has it sense to measure this on A system like we have now, because there are no wires that can be broken. | George: While I agree that no wires c
Electronics Forum | Mon Mar 15 23:00:40 EST 1999 | Dave F
| In the early days, we used screens made of stainless steel or polyester. Sometimes - after A period - the tension was not good, because A wire was broken. | Later on we started to us metal stencils, glued in A polyester screen. even than we had som
Electronics Forum | Tue Mar 16 08:38:59 EST 1999 | George Verboven (Process Engineer)
| | In the early days, we used screens made of stainless steel or polyester. Sometimes - after A period - the tension was not good, because A wire was broken. | | Later on we started to us metal stencils, glued in A polyester screen. even than we had
Electronics Forum | Mon Mar 15 08:21:31 EST 1999 | George Verboven (Process Engineer)
In the early days, we used screens made of stainless steel or polyester. Sometimes - after A period - the tension was not good, because A wire was broken. Later on we started to us metal stencils, glued in A polyester screen. even than we had sometim
Electronics Forum | Wed Oct 25 10:11:09 EDT 2000 | Wolfgang Busko
Paddesign, aperture size and stencil thickness determine the amount of solder for your joint. Once you have found suitable parameters you need to control the volume of your paste deposit which is influenced by printer settings, paste condition, stenc
