Electronics Forum | Thu Apr 11 19:12:11 EDT 2002 | djarvis
Sorry fellas -disagree. We only clean our stencils in the ultrasonic machine at the end of the run. If the same pcb is up the next day we clean them by hand. We use Electrolube SSS and the used rolls from the in line under stencil cleaner. Wipe the
Electronics Forum | Wed Mar 27 16:54:47 EST 2002 | davef
STARTING RANGES * Pressure � 1 pound/inch of blade (metal); 1.6-3 pound/inch (plastic) * Speed - 0.5 to 3 inch per sec [for standard pitch]; 0.5 to 1 inch per sec [for fine pitch] Your paste supplier�s recommendation is a good place to start. * Sepa
Electronics Forum | Fri Feb 13 18:08:06 EST 2004 | bman
We have recently aquired an MPM SPM stencil printer with an under stencil wiper. I have a list of approved solvents from MPM, but before I go and buy one I thought I would see what the fine people of SMTnet are using for their wiper solvent needs.
Electronics Forum | Tue Feb 17 16:10:21 EST 2004 | pjc
Speedline MPM has recently completed a study on solvents that are available to use in stencil wiper solvent systems. Until now there has been a small number of solvents that have been deemed safe to use. This was due to the fact that a majority of th
Electronics Forum | Thu Sep 15 10:43:18 EDT 2016 | claudea2
Thanks to Bobpan we re connected our wipe system and all the air actuators work fine. I still have a problem with the cleaner fluid dispenser. It is not moving as it should to dispense the liquid when we do the command. I suspect the values in the c
Electronics Forum | Thu Sep 08 13:14:11 EDT 2016 | claudea2
Hello, we have an Ekra E4 that we bought used and the stencil wipe never worked. We found that the air tubing for the up (black)& down (blue) of the wipe roll is missing. There are 2 push connectors for up and 2 for down to receive the tubes. Does an
Electronics Forum | Fri Apr 15 11:14:13 EDT 2011 | smtmax
Hi. I've been looking for SMT machines and have > a budget close to 100k total on a stencil > printer, p&p + feeders and reflow owen. Witch > machines would you choose with this budget? Have > any one of you heard of evest? _a class=roll > href
Electronics Forum | Sun Dec 08 23:40:19 EST 2002 | nonotalent
Hi all, We are currently having problems with > a laser-cut stencil that is electropolished and > nickel plated with 9-mil openings. The paste > does not release well from the apertures. We are > having to wipe after every print. The board is >
Electronics Forum | Thu May 31 23:29:57 EDT 2018 | judy49
Hi dear We are the manufacture for the smt stencil roll wiper for the DEK .EKRA MPM ect printer machine .any size can be customized . Hope we can have a chance to support u .
Electronics Forum | Wed May 17 13:33:32 EDT 2000 | John Thorup
Absolutely Mike Lets take that one step further and say that almost anything that you use to clean up with will from then on be considered hazardous waste. Wiping rags/pads, the previously mentioned vacuum bags/filters, the piece of cardboard that yo
