Electronics Forum | Thu Dec 30 12:17:19 EST 1999 | JAX
Marlies, The terms are one in the same but are used according to how you descibe the situation; i.e. centering refers to adjusting the part where as aligning normally deals with adjusting the vision. NOT THAT THIS IS A RULE. ( different strokes...
Electronics Forum | Wed Nov 24 09:45:54 EST 1999 | Boca
We have been using TA permalex blades for year, they work great! They will even work with you on custom designed blades to fit custom blade holders. If you're having trouble with solder paste sticking to the blades contact the vendor for some solut
Electronics Forum | Fri Oct 01 14:06:08 EDT 2004 | russ
after we teach their positions We tape the sticks down. It is also helpful to make sure that you tighten the "discs" that are located on the tension rods. There are available if you desire guides and stops from Samsung that attach directly to the fe
Electronics Forum | Thu Jan 06 09:03:57 EST 2005 | russ
It appears that this particular PCB supplier has a non-optimum HASL process along with other issues. It is much harder to completely remove the solder out of vias on thicker boards. Looks like more air pressure was needed to remove all of the exces
Electronics Forum | Wed Jan 12 13:57:28 EST 2005 | russ
Are you positive that the solder is sticking to the bottom of the fixture OR is it pushing the wave down so far that the solder is "squirting" out from underneath the pallet. This happens when deep/thick pallets are run at the same wave height as a n
Electronics Forum | Thu Mar 03 11:10:20 EST 2005 | Dougs
I'm telling you i've bought the nozzles wound the wrong way and it helped, no more probs with nozzles sticking, i'd tried buying fuji nozzles, checked all my component heights, set Z0 properly, checked shaft heights, set up st1, etc etc but the new s
Electronics Forum | Fri Apr 08 13:55:05 EDT 2005 | chrispy1963
Grant, Yes they do get broken by the operator or whom ever is loading or unloading the feeder stick pulling the tape through the feeder and the component pocket will snag the tip of the plow and bend it so that the tip ends up breaking off making
Electronics Forum | Wed May 16 08:26:34 EDT 2007 | davef
It's possible that your lead-free solder will stick to mounting bolts more than SnPb solder. Lead-free solder has a high tin content. Tin is a very good solvent. You may need to coat the bolts with a solder mask to prevent the solder from sticking.
Electronics Forum | Mon Aug 20 17:02:41 EDT 2007 | vervin
Now you are talking. Stick feeders are too slow and paint to work with unless you are doing a bunch of low volume boards. Stick feeders belong in the front of the machine. It's easier for the operators to keep any eye on them. The rear of the machin
Electronics Forum | Wed Sep 19 14:11:30 EDT 2007 | sapo916
I currently have 250 sticks of DDR2 Laptop Ram and 300 Sticks of DDR Desktop ram. I need someone to rework / refurbish these to working condition. Can anyone help me find someone or maybe tell me what sort of keywords I should use when searching fo
.png)
