Electronics Forum | Fri May 20 09:13:58 EDT 2011 | ck_the_flip
We have issues with the Philipps Luxeon Rebel LED where the part sticks to the cover tape during advancement. This causes the part to get flopped around in the pocket or the component gets dropped and damaged when the feeder advances. Has anyone ex
Electronics Forum | Thu Jul 19 18:15:15 EDT 2012 | jil2000
We have a material that is been stick at cover tape, only 1 supplier is failing and only embossed tape packing is failing. A dark spots between tape and component are observed, we already bake material to se if is humidity, is not. We already apply
Electronics Forum | Thu Jan 14 15:44:20 EST 2016 | sssvajunas
Hello, after we finish project (mydata) we unload tape from feeder and place a stick on the edge of tape. Maybe somebody can help with alternatives to this? (plastic clips) becouse then unloaded tape is used for another project it is sticky
Electronics Forum | Wed Dec 13 12:08:57 EST 2000 | Stefan Witte
Apparently the adhesive tape peels off from the joint, which could have some reasons. 1. There should be an overlap of the cover tape, as Cal mentioned. The new cover tape laying over the old by approx. 2mm. I also peel the cover tape a bit off, whi
Electronics Forum | Wed Sep 21 10:40:18 EDT 2005 | PWH
Splicing for us has been a rough go as we haven't really found a tool that works well/fast. We have a few different machines = different feeders. They all react different to a splicing "style". The best so far is a crimp tool that crimps a brass s
Electronics Forum | Wed Apr 02 12:44:15 EDT 2008 | cyber_wolf
Does anyone know of an after market source for the E-clips that hold the tape covers on CP and IP feeders. I am sure I can dig something up I just figured I'd ask ya'all first. Fuji PN: S1021A
Electronics Forum | Thu Dec 15 06:20:11 EST 2005 | rlackey
Hi Liza, We've seen it occaisionally in house on Universal GSM 8,12,16mm but not on Fuji (except when a feeder's not used for a while). Also on 44, 56 & 72mm (the smaller vol parts I mentioned earlier. It tends not to affect the Hoover Davis Feeder
Electronics Forum | Thu Dec 15 08:09:06 EST 2005 | GS
Hi Liza, several years ago we had problem like that only with Carrier Tape made by Ploycarbonate material and by using High Speed pick & place. Very few pbms met by using low speed P&P machine. Problems have been solved by using Polystirene Carri
Electronics Forum | Thu Dec 15 19:45:15 EST 2005 | Liza
Hi Rob, I would be asking the customers about that. I've read somewhere that teflon is used on feeders, is this a standard and does the absence or presence of this contribute to tape tearing? Thanks, LIza
Electronics Forum | Thu Dec 15 04:55:54 EST 2005 | 00629
Hi Rob, We encountered it on a 6x6mm device, hence, we could consider it as fine pitch. I suppose that it may also have something to do with improvements in the speed of the feeders. Honestly, we don't have that visibility bec our customers do not
