Electronics Forum | Sat Sep 07 06:57:33 EDT 2002 | mk
I agree but, are there really heavy metals in this water? Our process is as follows. Print Paste Reflow Board (no components, water soluble paste only) Wash Board Same reflow profile for almost every order so no solder balling issues etc. Carbon an
Electronics Forum | Tue Sep 07 06:24:07 EDT 1999 | Steve Cheung
We are changing over to a No-Clean paste soon and l was wondering how other people tackle the issue of stencil and PCB cleaning in high-volume production. The paste we are using is Cobar 325RX and its pretty sticky stuff let me tell you! Our proble
Electronics Forum | Mon May 21 10:25:16 EDT 2012 | swag
Ask for board fiducials if you're running arrays. Global fids on the panel do not work well. One handy product we use on flex is "Tacsil". Works well on SMT pallets as well as router operation. It's double sticky stuff that helps hold on to the P
Electronics Forum | Wed Aug 22 21:11:25 EDT 2001 | davef
When it works right, it's a beautious thing. => When goes wrong, you have one board with some of the other board's material, not too coo. Scribed and broken ceramic has bad-butt sharp edges. You'll feel this sticky stuff on your hands, look down,
Electronics Forum | Tue Jul 24 19:26:20 EDT 2001 | johnmaetta
Thanks Dave. We develop high-speed telecom PCB assemblies that use uBGA and other fine pitch components. Our policy has been to use an NC process at our CM. Our engineering group, who is also a customer, and uses these assemblies for development,
Electronics Forum | Mon Sep 13 21:18:29 EDT 1999 | Dave F
| Hi, | | Recently encountered missing components problem at the SMT process. | Among 13 chip components from the same part number mounted on the board, only 4 ( located in a same row and next to each other) were missing after post reflow. Checked t
Electronics Forum | Tue Sep 07 06:29:19 EDT 1999 | Earl Moon
| We are changing over to a No-Clean paste soon and l was wondering how other people tackle the issue of stencil and PCB cleaning in high-volume production. | | The paste we are using is Cobar 325RX and its pretty sticky stuff let me tell you! | |
Electronics Forum | Tue Sep 07 20:21:31 EDT 1999 | armin
| | We are changing over to a No-Clean paste soon and l was wondering how other people tackle the issue of stencil and PCB cleaning in high-volume production. | | | | The paste we are using is Cobar 325RX and its pretty sticky stuff let me tell you!
Electronics Forum | Tue Sep 14 21:56:34 EDT 1999 | KEVIN SIMPSON
| | Hi, | | | | Recently encountered missing components problem at the SMT process. | | Among 13 chip components from the same part number mounted on the board, only 4 ( located in a same row and next to each other) were missing after post reflow. C
Electronics Forum | Fri Apr 29 06:13:26 EDT 2022 | 1_manuel
Hi there, I'm pretty new to the SMT manufacturing stuff, please be kind. I have to mask up some parts of a stencil. Is there a recommendation for some masking tape I could use? It should be sticky enough for temporary use but not that sticky that i
