Electronics Forum | Sat Jun 13 00:48:32 EDT 1998 | Scott McKee
| can any body help on assembling straddle mount connectors on to a board? for information on the connector - it is a berg micropak connector I just got my first contract with straddle mount connectors. I have a few ideas to try... Call me at 714-9
Electronics Forum | Tue Jun 16 07:52:50 EDT 1998 | Jim Zanolli
| can any body help on assembling straddle mount connectors on to a board? for information on the connector - it is a berg micropak connector Teka Interconnection Systems (http://www.tekais.com)manufactures straddle mount connectors with solder and
Electronics Forum | Fri Jun 12 16:21:59 EDT 1998 | krishnan
can any body help on assembling straddle mount connectors on to a board? for information on the connector - it is a berg micropak connector
Electronics Forum | Mon Jun 15 10:53:27 EDT 1998 | Process Engineer
| can any body help on assembling straddle mount connectors on to a board? for information on the connector - it is a berg micropak connector Automated and/or hand assembly?? Inline/offline configuration. Paste on both sides of connector pads?? Onse
Electronics Forum | Fri Jun 26 19:59:07 EDT 1998 | Scott McKee
| can any body help on assembling straddle mount connectors on to a board? for information on the connector - it is a berg micropak connector 1. You need a fixture to insure the pins don't bend while inserting them on the board, coplanarity is a re
Electronics Forum | Wed Aug 18 06:34:57 EDT 2004 | Bernard Mulcahy
Hi , Our hardware designer wants to introduce a board with a straddle - mounted SMT connector, AMP part number 84487-1 and FCI 71292-001. This is an 80 pin connector that slips over the edge of the PCB and has 40 SMT pads on either side (at least thi
Electronics Forum | Thu Aug 19 09:38:24 EDT 2004 | russ
We use a locally made fixture that uses tooling pins and a mating block to place the connector onto/into. We then use a toggle clamp to push the connector onto the board. We had to make no adjustments to stencil for our application. Russ
Electronics Forum | Wed Aug 18 10:34:35 EDT 2004 | russ
We do this every day, We print the bottom side, then the top, and have a tool that presses the connector on. We then process the board down the line. The only tricky thing is keeping fingers out of paste. Fortunately this is a single sided board.
Electronics Forum | Thu Aug 19 05:12:41 EDT 2004 | bernardmulcahy
Hi Russ, Thanks for the reply -- It is not a double sided board so I guess I will be doing pretty much the same process as you described. I was wondering about was the tool you mentioned -- Is this just a fixture you got made locally or some specific
Electronics Forum | Thu Jul 02 04:30:43 EDT 2015 | eniac
Hi guys. Does anyone know how to assemble straddle-mount connectors in mass production? I mean connectors like this: http://www.digikey.com/product-detail/en/GWE32DHRN-T941/S9650-ND/4794534 GWE32DHRN-T941 I know how to assemble it manually, but I hav
The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.
Training Provider / Events Organizer / Association / Non-Profit
6600 City W Pkwy
Eden Prairie, MN USA
Phone: 952-920-7682
