Electronics Forum | Tue Apr 19 10:19:28 EDT 2011 | leemeyer
We currently have a job that uses press fit solderless pins. The pins are custom and only supplied in bulk packaging. I am looking for a machine that can orient the pins and present them to my insertion machine. Of course i need the pin to be present
Electronics Forum | Thu Feb 08 21:30:56 EST 2007 | Bill
Yes, many thanks for your reply.
Electronics Forum | Fri Feb 02 21:31:38 EST 2007 | bill_gates
Hi, I am considering to use pressfit D-Sub and DIN connectors on a backplane. The IPC guideline does just cover pin protrusion for soldered pins, which have to be flush with the board as a minimum acceptable design. Yet, if the backplane may be thic
Electronics Forum | Thu Feb 08 00:40:37 EST 2007 | Scott
I think that as long as the compliant portion of the pin is completely in the board, pin protrusion should not make any difference. I have seen some large Aerospace companies internal specifications and the two requirements seem to be that the compli
Electronics Forum | Mon Jan 22 09:35:34 EST 2007 | saaitk
Check that your boards haven't been over plated. Too much plating in the hole can slump to the underside of the board during reflow. If you are then press fitting on the underside of the board you can have problems with hole diameter. If the hole is
Electronics Forum | Wed May 16 14:09:22 EDT 2001 | davef
First thing I'd use is IPC-A-610C, �4.8.2 Connector Pins - Press-Fit Pins. Does it work in your case?
Electronics Forum | Mon Oct 25 16:53:57 EDT 1999 | Mario
Hi, Does anybody know where I could get a cheap but efficient press for press fit connectors (200pins and up)? Pneumatic or Hand lever Mario
Electronics Forum | Thu Apr 18 14:00:35 EDT 2002 | Romain
Is anyone has experience on problems with press-fit on Ni/Au board finish. Connectors pins are SnPb finished. I am particulary interested by experiences or documentation in very agressive environmental conditions (avionics or space buisness) Thanks r
Electronics Forum | Tue Nov 05 00:53:31 EST 2002 | YNgwie
How do we do press fit component rework ? I have connectors with 700 pins, and the rework part is a headache. What is the best method ? Thanks in advance.
Electronics Forum | Thu Oct 28 19:56:39 EDT 2021 | stephendo
Or press fit. But he said he can't change the pins or the board.
.gif)
