Electronics Forum | Tue Mar 20 10:27:36 EDT 2007 | davef
Print styles: Print - Most common print mode * A single print stroke forward on first board * A single print stroke reverse on next board Print-Print (Double Print) * Both forward and reverse printing strokes * Helps to ensure complete filling of th
Electronics Forum | Thu Sep 28 11:15:40 EDT 2000 | pr
We had the same problem and after watching it run for a while we noticed the paste always pulled up on the blade that made the first stroke. We got rid of the problem by using less paste (about a finger width) and flattening the paste out before the
Electronics Forum | Wed Jun 29 15:42:19 EDT 2011 | dekhead
Yes it is "Print Front Limit" and "Print Rear Limit". Negative value extends the stroke, Depends on software version how useful it will be, as there are differing limits on how much you can extend the stroke. http://www.dekhead.com
Electronics Forum | Wed Apr 14 13:39:08 EDT 2021 | SMTA-64387124
I am working with a CM in Taiwan and we are seeing significant differences between the paste printing bon the forward stroke vs the backward stroke. Print parameters are the same (pressure, speed, snap off speed) but there is a significant difference
Electronics Forum | Thu May 08 10:44:48 EDT 2003 | mark_susol
I am experiencing a problem with print misregistration only in one direction on our UP2500. When it prints from front to back I get perfect regsitration on micro BGAs, but on the second stroke moving back to front I get a misregistration in the strok
Electronics Forum | Fri Sep 22 08:37:47 EDT 2006 | john
Using MPM UP2000 Hie printer.When give cycle wiper command,After comleting forward stroke machine gives error wiper not parked,press next to continue.If press NEXT VY axis software limit comes and machine give message press NEXT to continue.IF press
Electronics Forum | Mon Nov 11 22:23:29 EST 2019 | dekhead
Pretty much paste dependent on what is required. I am not a huge fan of kneading unless absolutely necessary, so 15 minutes seems pretty short, and generally do only 2 strokes. Multiple print deposits is used when, for whatever reason you are not see
Electronics Forum | Mon May 02 10:51:19 EDT 2005 | pr
Sorry, go to "Utilities" pull down menu then "set stroke" and the software will walk you through it.
Electronics Forum | Mon Jun 13 15:13:36 EDT 2005 | peter ng
The placing stroke(mounting press) of the BGA may be too high.Try to reduce the value at the component data.
Electronics Forum | Thu Jan 31 09:57:51 EST 2008 | razor1491
What is recommended for Squeegee replacement besides visual. Is it some many squeegee strokes?
