Electronics Forum | Thu Sep 23 15:26:30 EDT 2004 | Tarheel
Ours says Model: WD1D200KCN Input: 120 VAC 60HZ Output: 9VDC 200mA Class 2 Transformer Power Supply E31-0900-25 Electronic Control Design, Inc. Milwalkie, Oregon USA
Electronics Forum | Tue Feb 21 13:40:11 EST 2006 | slthomas
The SuperMole Gold uses a proprietary rechargeable Ni-MH battery design and while it's a nice unit and I'd love to have one now, I wouldn't want to have to replace the battery. In other words, it's going to cost you. FTR, the last one I used was rou
Electronics Forum | Fri Apr 25 13:40:37 EDT 2008 | flipit
If you know a little about electronics, you can probably figure it out. Or just buy one from Mole. Do you have software? More than likely you will have receive, ground, and transmit. Open up the Mole if you can and look for the RS232 chips(Max232
Electronics Forum | Sat Nov 03 05:19:59 EST 2001 | Ben
Hi I have question about thermocouple type use for Super M.O.L.E. I found in some article that type K T/C (Nickel-Chromium vs. Nickel-Aluminum) may suffer from temperature cycling hysteresis at above 250 degree C and also diffecult to solder. Now
Electronics Forum | Tue Jul 30 18:26:38 EDT 2002 | burb1999
MYDATA MY12 for the pick and place
Electronics Forum | Mon Jul 29 17:03:03 EDT 2002 | burb1999
Just setting up a new SMT line and have questions on which profiling product to use. So far the two in consideration are Super M.O.L.E. Gold and Slim KIC 2000... Please share any thoughts, experiences you have had with either and your opinion....
Electronics Forum | Fri Nov 20 12:41:41 EST 2009 | brycearkos
Has anyone attempted to, or successfully used a custom made (DIY) protective thermal enclosure for the Super M.O.L.E. gold profiler? We recently purchased a Bravo oven that came with everything for the ECD profiling system... except for the thermal
Electronics Forum | Wed Sep 22 12:23:11 EDT 2004 | Peter Barton
FYI Label on the back of my charger says the following: Pt. No. WD23D200KCN PSU E31-0900-21 Input 230 V AC Output 9V DC, 0.2A 1.8VA Ours is of course United Kingdom type, even if the mains plug is European and requires an adaptor. Not too sure a
Electronics Forum | Fri Nov 20 17:17:19 EST 2009 | Flipit
I have done this for the Datapaq and it worked well. The SlimKic uses a yellow thermal blanket material. It is called Pyropel. You can get it at McMasterCarr. I think McMasterCarr calls it polyimid foam insulation part number 93015K64 of 3/16 thi
Electronics Forum | Mon Sep 20 21:37:14 EDT 2004 | Hayden
Hi folks, I currently use the supermole gold to do all my SMT relfow profiles. However, I've lost the charger for the supermole battery pack. If someone also use this tool and have their charger handly, would you please look at your charger and give
.gif)
