Electronics Forum | Wed Nov 17 17:27:01 EST 2004 | jimbernhard
Megan, I know that Ovation Products will send Grid-Lok's out for evaluation. They also sell used and demo systems directly. You can contact them from their website at http://www.grid-lok.com Hope this helps. Good luck with your evaluation
Electronics Forum | Sun Nov 14 18:28:05 EST 2004 | dorklover664
From talking to the DEK rep. the Red-E-Sets seam to be the way to go if you are watching cost. We have a 30-day �trial� of them right now so I will post what we learn. I keep trying to talk my manager in to the Grid-Loks but I don't know if that�s go
Electronics Forum | Thu Nov 11 11:22:29 EST 2004 | clampron
We are using the Red-E Sets on our DEK Infinities and they are working fairly well. There are some issues but the setup time beat the Form Flex and was more reliable than the Autoflex in our machines. We looked at Grid Lock. This seemed to solve all
Electronics Forum | Fri Nov 12 08:02:07 EST 2004 | no gel pig fan
I would get a demo set of the form flex (they will probably give you it for at least a few weeks hopefully a month) and check it out. They could be much more reliable than when I tested them. I would definately take a working form-flex over a working
Electronics Forum | Sun Nov 14 17:29:57 EST 2004 | donb
I'm glad I dropped in here. I am about to buy some tooling for a Fuji GP-641E. I have been told to get the Red-E-Set, but from this discussion I'm not sure if that's a good idea. The local dealer wants US$1000 each for the 24" segments, we would pro
Electronics Forum | Fri Mar 11 10:00:22 EST 2005 | ???
Anybody out there know of a good (2nd) source to purchase single magnetic board supports used on quad/samsung machines. These are spring loaded and contact the underside of the board in the pick n place machine
Electronics Forum | Fri Mar 11 10:51:29 EST 2005 | mfoster
Samsung Back-up pins available from Dynatech for $30 each. http://www.DynatechSMT.com
Electronics Forum | Tue Mar 15 14:29:37 EDT 2022 | babe7362000
Does anyone know who supports the SJ Innotech Stencil Printers in the US? Thanks for any info.
Electronics Forum | Tue Mar 15 17:38:36 EDT 2022 | bobpan
Try Chaly, his email is: chalylee@hotmail.com. He supported those printers in the states a few years back.
Electronics Forum | Mon May 21 16:19:40 EDT 2012 | tbouslog
We are using Ekra Stencil printers and they are great except for 1 problem... We run several different boards a day and we need a way for the operators to place the pin supports in the same postions on the second side of the board everytime a board i
