Electronics Forum | Wed Mar 29 17:10:25 EST 2000 | Jon Wentz
Hi Dave, What feeder model do you have? I took a quick look in my parts list manual and again, depending on your feeder model, you might be able to buy the needed part(s) from Zevatech/Juki. Have you checked with them yet? For example, the main feed
Electronics Forum | Thu Sep 01 01:36:23 EDT 2005 | adlsmt
The parts could still be the problem regardless if they came from different lots. If you look under a high mag microscope you should be able to see to some extent if once the lead is gone does it look like the lead plating is gone from the lead and i
Electronics Forum | Sat Aug 07 11:47:47 EDT 1999 | JohnW
| | | | | | | | | | | | Hello, | | | If you are using no-clean and they are entrapped in the flux it is also IPC accepted but i havent found a customer yet who agrees with that. Im sure you have checked your profile. I had the same problem with chi
Electronics Forum | Mon Mar 08 20:17:41 EST 1999 | Michael Larsen
| | I'm having a fun time between BGA rework/repair using an SRT 1000 and SPC efforts (much easier) using DEK stencil printing processes and BTU reflow with 6 Fuji lines in between. | | Concerning the BGA stuff, I'm getting about 60% success using
Electronics Forum | Mon Sep 02 15:20:48 EDT 2013 | aemery
Interesting! not the usual error. In my experience when the vision cables get damaged it shows up and white noise flashes across the monitor. The connections are the easiest to check so here's your system layout with connection points. Starting at
1 |