Electronics Forum | Mon Jun 01 18:54:58 EDT 2015 | frix
Good day, I've got a situation with a Siemens 80S15. Everything used to work fine. One day when I switch the machine on the star (12 segment star in the head) just keeps on running when a head reference is commanded in SiTest. Can somebody please g
Electronics Forum | Thu Jun 04 07:54:53 EDT 2015 | frix
Good day, Thank you very much for the response. We are currently running 0603 and larger. I don't think there is any components that got into the head. I've been reluctant to open up the glass encoder of the head - it seems that a lot of the parts
Electronics Forum | Wed May 08 10:40:48 EDT 2013 | huske
We have had this problem before, and Phil was pretty close. On the hydra where the vacuum tubes are connected to the tools shafts you should see a red light inside there. this light locates a lazer cut mark on each of the tool shafts, this lets t
Electronics Forum | Thu Feb 15 00:09:59 EST 2024 | erici
Does anybody know how to disable the RV head on a Siplace F5 machine. Our machine is configured with a 6-head RV head and an IC head. We are having problems with the RV head, and machine wont initialise without finishing the RV head reference run.
Electronics Forum | Thu Jun 30 18:48:45 EDT 2005 | darby
CSM 84 = YM84S CSM84VZ = YM84VII Generally referred to as the "Hyper" series. Model numbers went something like this - YM51VM, YM51VMII, YM53VT, YM53VTII, YM58VA, YM58VAII, YM100VP, YM100VPII, YM66S, YM84S, YM84V, YM12D. Other models were "created"
Electronics Forum | Thu Feb 15 20:16:59 EST 2024 | erici
thanks for the reply. The Step motor module at the head is defective, so when the machine does the reference run, it will give a timeout because the DP station and pick and reject stations are not working. I reckon if i disable the RV, maybe i can
Electronics Forum | Mon Oct 20 10:08:42 EDT 2014 | rgduval
Had someone in from the broker that we bought this machine from, and he did some poking around. We've learned some things, but, unfortunately, are still no closer to getting the machine running :( We discovered (based on double checking other machi
Electronics Forum | Thu May 05 19:13:33 EDT 2016 | darby
Thanks Sr. If you have zero tolerance for simul pick up in your component files then you will not have simul pick up due to variances in your head offsets. So you are saying that on your Juki you run a tolerance for 0201? All other head positions at
Electronics Forum | Sat Apr 01 16:41:01 EDT 2023 | dilogic
Today I stumbled upon very odd issue - we have one GSM2 with FlehJet heads on both axes. New program was created and it stops on the first task for Head2 throwing out a message like this: "Component 0u1/0805 (reference id C4) can't be found wit
Electronics Forum | Mon Dec 05 09:04:25 EST 2011 | haiae
I just buy a used Contact 3AV machine. Afer fixed some things I think the machine can be ready to run and in fact for first time the machine power up, pass all self testing, homing is done, moving of table, heads, actuator is good, pneumatic function
.gif)
.png)
winsouce.jpg)