Electronics Forum | Wed Aug 11 11:54:50 EDT 1999 | Dave F
| | Has anyone ever heard of this? I have a Camalot System 5000 and we were in a pinch to produce some prototype boards. We needed Sn62Pb36Ag2-no clean in a dispensing mesh. All I could get my hands on was some Interflux paste in a jar. The formulati
Electronics Forum | Wed Aug 11 10:21:03 EDT 1999 | Brian
| Has anyone ever heard of this? I have a Camalot System 5000 and we were in a pinch to produce some prototype boards. We needed Sn62Pb36Ag2-no clean in a dispensing mesh. All I could get my hands on was some Interflux paste in a jar. The formulation
Electronics Forum | Tue May 20 11:32:38 EDT 2003 | JB
So far we haven't had any problems with air in the syringe, but in the process of replacing the old syringe is were we had the problem. I'll keep your tip in mind if we ever have the need to get air out of a syringe though. Thanks for the info. JB
Electronics Forum | Fri Oct 19 04:47:19 EDT 2001 | genglish
No, we are not filling the syringes, to be honest the problem is not with the displacement syringes on our conventional method of placing glue, but purely with screen printed adhesive. That's the weird thing. (G)
Electronics Forum | Tue Aug 14 08:06:38 EDT 2012 | milan89
Hello, I am having a problem with Universal GSM1 with the Adhesive head. It's a model with piston pump. When i try to dispens a sping that needs to push the adhesive in the syringe doesn't have power to push it. Everything is well cleaned. Maybe it'
Electronics Forum | Wed Dec 12 08:42:35 EST 2001 | jmathis
Hello, The problem is we are using loctite 3609 in the 300ml syringe and loctite only sells this by the case (10 cart). Our company can not use this quantity before expiration. Does anyone have any recommendations for a smt adhesive that can be pu
Electronics Forum | Tue May 20 05:01:27 EDT 2003 | gavinscott
Hi, I have had this problem in the past and the best method I found was... Before removing the old syringe and fitting a new one, ensure the viton tubing is doubled over and pinched. This will help to eliminate any airlocks in the viton tubing whic
Electronics Forum | Thu Aug 16 01:56:13 EDT 2012 | milan89
Thx for the response. But the problem after all was in the syringe. The fuji one was big,and the stop nuts didn't have the presure to push the glue out. With the 10 ml regular syrnge everything is flowing like it should.
Electronics Forum | Tue May 20 11:09:30 EDT 2003 | JB
Hello Gav, We have tried the procedure that you described, and it didn't work well for us. Even though the viton tubing is doubled up and pinched, no amount of glue is visible at the tip of the tubing. So getting the glue to protrude from the syring
Electronics Forum | Tue Dec 19 20:54:52 EST 2006 | Guest
Your experience is quite different than mine. At continues dispensing,I noticed that glue dispense volume increase as the material in the syringe decrease. My machine is using air time pressure pump. This is normal for this kind of pump since ai
.gif)
