Electronics Forum | Thu Feb 11 15:11:57 EST 2010 | hegemon
Speaking from experience, my vote goes to Mirtec MV-3 or MV-7 with the 4 Megapixel camera setup. 2 Megapixel cams won't inspect that small, other than for presence Yestech also has machines that are suitable for this work. No company affiliations,
Electronics Forum | Tue Feb 16 12:52:45 EST 2010 | esoderberg
I have two Yestech machines, the latest is a 5 megapixel camera machine. These are used every day all day. Excellent machine.
Electronics Forum | Mon Feb 08 06:08:50 EST 2010 | cunningham
What are people using for AOI systems and how are you using them We are on the market for 2 systems post reflow capable of inspecting solder joints at 010 sized components we have 2 old systems at the moment inspecting for presence and polarity p
Electronics Forum | Thu Feb 11 06:50:17 EST 2010 | CL
Good Morning Bryan, We are using Mirtec MV-3 AOI's with 4 megapixle cameras. We use them for 100% post reflow. We are checking, presence, polarity, value, solder, bridging,component height for BGA, QFN etc... and 1st piece validation for machine set
Electronics Forum | Thu Feb 18 18:25:33 EST 2010 | tony_d
Hello Bryan, My recommendation is MIRTEC by far. We checked out several machines and narrowed the selection down to two, YESTech and MIRTEC. We had an opportunity to work with both of these machines on our production floor. We found that the MIRTE
Electronics Forum | Mon Aug 30 10:18:32 EDT 2010 | ifrydr
Hello - Can anyone offer any insight or info on the particualr ERP/MRP systems used at your company? We currently have a small system and are looking to upgrade but I would really like feedback on systems used in a CM/EMS environment. Any input is
Electronics Forum | Tue May 25 02:18:15 EDT 2010 | sibbe
i'm really intrested in that as well, because we are having some issues with our Rebel Led's
Electronics Forum | Fri Jun 04 04:10:52 EDT 2010 | leeg
Have you checked the Rail Lifted Sensor
Electronics Forum | Tue Aug 10 06:26:00 EDT 2010 | cunningham
We have 2 Koh Young systems and they perform just great
Electronic manufacturing services - electronic design, development and manufacturing. Circuit board design, prototyping, FPGA services, signal integrity and simulation, pcb assembly. Factories in California USA and Malaysia.
Manufacturer / Consultant / Service Provider
3240 Scott Blvd
Santa Clara, CA USA
Phone: +1 408 980 0400