Electronics Forum | Wed Jan 11 15:01:28 EST 2006 | jsloot
I have a samsung CP40 that is taking an average of 2.5 minutes to load a step program. My CP50 takes about 30 seconds. Both machines are configured the same in regards to the computers, both the operating system and internal CPU for machine functions
Electronics Forum | Mon Dec 02 23:52:56 EST 2019 | sarason
Take your disk out of the machine and use a Hard disk recovery tool after you have hooked it up to another computer. It may take a while but you should be able to recover partitions, files and registry if someone who knows what they are doing does i
Electronics Forum | Wed Jan 29 10:25:23 EST 2020 | dontfeedphils
VG foils are about 5mm thick and two in the rack takes up just under 20mm, so admittedly not a ton of space savings. That's not the only reason I like the VG system though. It takes multiple failure points (screen tension/mesh adhesion) and reduces
Electronics Forum | Mon Sep 25 17:42:40 EDT 2000 | Steve Thomas
Back in October a post went up re: the fact that a solder manufacturer quit recycling paste, and the responses then weren't encouraging, so I'm gonna stir it up again. I haven't figured out what we're going to do with ours yet and it's piling up. N
Electronics Forum | Wed May 22 14:38:55 EDT 2002 | dougt
Thanks for the information. Our company is eventually going to have to use 0201's and I'm thinking of all the possible problems that will be encountered. I'm not sure if it's true for all feeders but I believe they tend to have a small amount of pla
Electronics Forum | Tue Mar 17 12:48:41 EDT 2015 | cyber_wolf
Couple things: If the rubber roller that touches the take up wheels is worn you can adjust it. The axle is on an eccentric. Make sure the "teddy bear faces" that adjust the pick point are not grossly different from the left to right sides of the ma
Electronics Forum | Wed Aug 12 17:18:03 EDT 2015 | dyoungquist
Here is our solution: We run the assembly line 40 hours per week and use 500g cartridges of solder. We take 1 cartridge out Monday morning and leave it out until the end of the Friday shift when it is put back into the refrigerator. That means you
Electronics Forum | Thu Dec 21 15:13:16 EST 2017 | georgetruitt
Is the process the same for every product running through the selective solder machine? Load program, acquire or set up fixture, Change/load flux?, Change/Load solder pot? Are the machines cold when the operators need to use them or are the machin
Electronics Forum | Wed Mar 28 09:25:53 EDT 2007 | SWAG
Yes, pre-loaded feeders is the best way. If you do not have that option as you are high mix or do work for different companies that have many different part numbers, I would guess that your printer will take about 15 minutes to get ready, each HSP f
Electronics Forum | Mon Jun 05 16:49:11 EDT 2000 | Chris
Is anyone having trouble with PSA (pressure sensitive adhesive) cover tape used with embossed plastic tape? I am placing 0402 components out of embossed plastic tape with PSA cover tape. The feeders gum up, the take up reels are impossible to remov