Electronics Forum | Mon Aug 08 07:12:07 EDT 2005 | pci
yes there are. main mfrs of axial inserters are panasonic,samsung,tdk,universal.... in some of the cases u need to have a axial sequencer too, which are used to sequence the axial componnets prior to the insertion.
Electronics Forum | Mon Aug 08 16:49:44 EDT 2005 | slthomas
There's a Universal 6241D on the Equipment Mart page of this site in New Hampshire, and a 6241B in the UK. I've always like Universal, but admittedly that's all I know about PTH AI. :)
Electronics Forum | Tue Jan 05 17:32:51 EST 2016 | taiji
We have a TDK radial machine VC-7C, The "DNC CUT" button doesn't change state, the machine shows alarm "904 ALM CRD RX RECEIVE 800", We already check button and relay and working OK, Also check the cables and also OK. We have no idea where else to lo
Electronics Forum | Wed Nov 15 14:33:57 EST 2017 | nc_dan
We acquired a used ViTrox V510 AOI machine, our first AOI machine. The programming interface is quite a bit different from our Pick and Place machines so our current tech is not familiar with it. We read the programming manual and made some progress
Electronics Forum | Tue Apr 13 10:55:01 EDT 2004 | mnguyen
Spoke with TDK and they told me Unicam or now called Technomatics I think makes a software to program the VC but you can also use dynapert to program the AC-7. Is that true? TDK told me they do not have any software to program the machines using soft
Electronics Forum | Fri Apr 30 10:22:10 EDT 2004 | mnguyen
I am having a hard time looking for a programming software for a TDK AC-7 Axial. TDK makes a MFT-30 for their Radial machine but there is no programming software made for the Axial machine. I see in it's file that you can export and import Dynapert f
Electronics Forum | Mon Dec 01 23:48:37 EST 2003 | masr
Any one know about TDK RX11 machines? I have a servo problem with "C" axis. I'll apreciate any one help! Tks! M.S.
Electronics Forum | Wed Aug 27 21:03:03 EDT 2003 | davef
What does TDK [ http://www.component.tdk.com/fa/factoryautomation.html ] say?
Electronics Forum | Mon Dec 01 23:44:58 EST 2003 | masr
Any one know about TDK RX11 machines? I have a servo problem with the "C" axis (no encoder reader signal) I'll apreciate any one help! Tks!
Electronics Forum | Fri Apr 09 11:48:29 EDT 2004 | jbservices
TDK can supply the cables and software, you supply the PC, all they need is machine serial number to suply you with correct version of software. let me know if you are intersted and you can contact them direct. thanks john
winsouce.jpg)