Electronics Forum | Tue Nov 30 17:00:26 EST 1999 | Dave F
Listed in the archive are suppliers of lead forming equipment. Most have equipment that can do the stand-ups you require. Yes you may be able to find this used. Yes you may be able to find someone with that machine near you who after you buy the t
Electronics Forum | Wed Jan 21 15:10:30 EST 2015 | ahernand75
VCD equipment is a single-process sequencing and insertion of axial components and jumper wires. Cheers!
Electronics Forum | Mon Sep 22 11:55:26 EDT 2008 | wrongway
you might want to check out panasonic they can handle a lot of feeders on one machine and are fast We have universal advantis machines have had them for a year have'nt had any problems yet. have not had universal calibrate them yet still placing par
Electronics Forum | Wed Nov 12 11:32:36 EST 2003 | lloyd
Depending on quantities etc, you probably have a few options. If it's the automated route you require then any of the radial insertion machines from UIC or TDK will do the job. We've inserted LED's in the past with machines over 10 years old, so if
Electronics Forum | Fri Jan 24 06:45:19 EST 2020 | alpha1
Depending on your equipment. If you are running stand alone equipment. Separate Sequencer and Axial Inserter there's not much you can due expect check the process. The axial should still catch at least most of the defects. If you have a combination u
Electronics Forum | Thu Jan 23 17:24:08 EST 2020 | rvines1
Due to couple of customers who still have some products that are completely through-hole, we use our Universal DIP and Axial equipment on a somewhat regular basis. Our machines are pretty old, but they work pretty well, and we don't do enough throug
Electronics Forum | Fri Jan 31 10:54:32 EST 2020 | rvines1
One concern with DIP insertion is making sure the operator inserts the correct tube into the correct feeder. Has anyone ever tried pick-to-light or anything similar?
Electronics Forum | Thu Jan 23 18:34:15 EST 2020 | slthomas
It's hard to poka-yoke loading reels onto the machine (either a inserter-sequencer or a sequencer, then getting the sequenced reels properly indexed). The only way I know of to make sure they've been set up properly is with visual inspection of EVERY
Electronics Forum | Fri Jan 31 13:45:49 EST 2020 | slthomas
We had a custom bar code storage and feeder setup. Stores material handlers would bring the parts to the line, scan the part number on the kanban card (always accompanied the parts), and the storage location LED flashed so they knew where the place
Electronics Forum | Tue Mar 26 18:19:55 EST 2002 | davef
Is this revisionist history? Have you been breathing deeply, while eating corn doodles? Let me knock-down a couple of Zoloft. OK. Here�s the way I remember things � * UIC, Dynapert, and Amistar made the best PTH insertion equipment on the planet.
