Electronics Forum | Sat May 03 13:56:12 EDT 2014 | jyo_409
We are using TL431 in our most of the power supply circuits. Recently the power supply board is returning from the field due to TL431 component problem. Could you people, please suggest me what are the possible reasons for TL431 failure & trouble sho
Electronics Forum | Thu Apr 17 07:51:19 EDT 2014 | emeto
Opens are on the device to the PCB - mainly on the edges, that makes me think I get some kind of warping,but even if I bake parts and boards doesn't help. We also tried different reflow profiles - same results. I hear that some people use dip fluxers
Electronics Forum | Thu Aug 07 15:27:57 EDT 2014 | tombstonesmt
We splice all day. We use sierra splice tool and their yellow splice. Technique that I found works very well is to peel back the cover tape of new reel over two empty slots (our machine detects when splice occurs and allows two empty slots without re
Electronics Forum | Wed Jul 16 11:48:23 EDT 2014 | markhoch
We're an OEM Tier 1 Automotive Supplier, (Yes, one still exists in the US), with two SMT Lines and we splice all day, every day. First, let me say, I 100% agree with Rob's comments above. Technique is everything. We use ASM SiPlace, (formerly Sieme
Electronics Forum | Wed Nov 19 18:43:04 EST 2014 | gregcr
Hi All, I've been in the CM world for a long time and it seems like there has been little change in the packaging techniques used at the end of the day. Assembled circuit boards in small/flex volume are bagged or bubble wrapped and boxed up to ship
Electronics Forum | Mon Jul 14 12:11:17 EDT 2014 | rgduval
We used to use the Tapesplicer tool available from http://www.tapesplice.com (Sierra Electronics), in a high mix, low volume environment with MyData's (older feeders). Short review: It worked. Longer review: First, technique is everything. Splicin
Electronics Forum | Sat Sep 27 10:09:10 EDT 2014 | gascon5383
I have experience with an essemtec pick and place machine that I also had to deal with minimal training. I had no prior experience in pick and place programming and we had the technician for 3 days of training, but out of the package the machine didn
| 1 |
winsouce.jpg)