Electronics Forum | Mon Jun 09 17:41:45 EDT 2003 | davef
Welcome. You have selected a fascinating area to work. "What is delta temperature? Depends on what someone is talking about. Here's some possibilities: * In process equipment definition, the difference in temperature from one side of conveyor to
Electronics Forum | Fri Sep 21 11:02:37 EDT 2001 | davef
You can measure temperatures any place that you would like, but the issue is the temperature of the solder. We've seen solder temperatures that vary from lead to lead on the same component. Why don't you want to measure the temperature of your so
Electronics Forum | Fri Feb 01 10:57:52 EST 2002 | davef
Yes, that's what people are thinking. The 217�C melting temperature that you mention requires a ~250�C reflow temperature. Generally, boards, legend ink, and components cannot take that temperature. Further, few ovens can produce that temperature
Electronics Forum | Mon Jun 16 14:39:49 EDT 2003 | stepheno
The second one is typical. The important temperature is the temperature of the joint, not the setting of the oven. The oven setting are only important because they determine the temperature of the joint. If you set the oven to 150, that will be th
Electronics Forum | Tue Jun 18 04:01:07 EDT 2019 | aite
Hi! You can choose low-temperature solder paste. The low-temperature solder paste is tin and antimony with a melting point of 138 °C. When the components of the patch cannot withstand the temperature of 200 ° C and above and the patch reflow process
Electronics Forum | Wed Aug 23 17:15:25 EDT 2000 | Dr. Ning-Cheng Lee
The ternary SnPbBi phase does form commonly when Pb and Bi are combined. No special condition required. Presence of this phase jeopardizes the reliability for applications involving temperature near 96C. Using low temperature solders means a lower s
Electronics Forum | Thu Dec 13 21:02:38 EST 2001 | davef
Contact the fabricator of this part for their recommendations. There is about as many different approaches to soldering thermistors as there is thermistors. You imply that this is a SMT style package. If that is correct, it's curious that the comp
Electronics Forum | Thu Oct 20 09:58:54 EDT 2016 | davef
You say, "... re-flow profile temperature, the peak temperature of a component was on 253*C." Questions are: * I assume that was the temperature of the component body. What was the temperature of the solder ball? * How does the temperature on the pr
Electronics Forum | Tue Feb 27 10:19:06 EST 2007 | Michael Konrad
If you�re running chemistry in the wash, the wash temperature will be influenced by the chemical manufacturer�s recommendations. Typically, wash chemistries recommend operating temperatures between 130F and 150F. If your application is straight D
Electronics Forum | Sat Aug 27 12:45:44 EDT 2005 | Mark
Thanks for the replies. Interesting white paper. Didn't quite answer my concerns but still a good read. I was actually surprised that to test temperature uniformity across the zone, they attached T/C's to the substrate rather than measure the ai
