Electronics Forum | Mon Aug 24 18:45:11 EDT 1998 | Steve Evers
| We are looking at implimenting a bar code system for a SMT | production line. To start we are looking at label printer/applicators. Are there any other companies that we should consider besides Zebra and Imtec?? Thanks for your input. | John If
Electronics Forum | Thu Aug 20 09:19:19 EDT 1998 | JUSTIN MEDERNACH
| Require a conductive adhesive - either isotropic or anisotrpic - which can be used for 100micron oitch devices. | Must be resistant to solvents such as MEK and acetone. | Cure below 150C, with possible potential for rework of the conections. MR. T
Electronics Forum | Mon Aug 24 19:08:07 EDT 1998 | Stev Evers
| Does anyone have any recommendations for SMT Adhesive and Solder Paste Cleaning Systems? We are looking for a complete system of Chemical, Equipment, etc... Utrasonics are the only technology for my money that offer any hope of removing this tack
Electronics Forum | Fri Aug 21 17:16:11 EDT 1998 | Wayne Bracy
| | Steve: | | Take a look at the attached url. As with all testing systems, tooling / fixturing is costly. But, not as bad as a bunch of "Bed of Nails" test fixtures. | | Glad you had one of those great weekends, had to spend mine fishing,, again
Electronics Forum | Sat Aug 22 01:56:54 EDT 1998 | Lance A. Smalley
Panapro Host Optimization should actually be very good. Make sure you're not using a fixed setup or the feeder carriage will move alot. Also make sure you do not change parts data in the machine after the program has been generated or speed of the
Electronics Forum | Mon Aug 17 02:45:18 EDT 1998 | Bob Willis
| 5 micrograms per sq. cm. is actually not too clean. The maximum military allowed post-clean, on-board contamination is 5.7 micrograms of NaCl /cm squared (when using the Zero-Ion brand ionic contamination tester). | We are use to seeing cleanlines
Electronics Forum | Thu Aug 13 19:38:07 EDT 1998 | Justin Medernach
| How bout a way to check the forum for new postings according to date. I have seen other forums that will give you an option to click on new messages and see what has been posted since the last visit. Mike, Thank you for being the first contributor
Electronics Forum | Thu Aug 13 13:35:38 EDT 1998 | Mike Cox
| I am looking for information on any Gage R&R studies for the CyberOptics LSM solder paste inspection system. If you are a current user of one of these systems, are you finding any problems with the repeatability due to operator variation? What is
Electronics Forum | Fri Aug 14 15:47:31 EDT 1998 | Ben Salisbury
All we've bought is used equipment...and since the start I've learned alot about the inner workings of FUJI equipment. The first set of machines were bought from a re-seller, they were all functional but far from being in good shape. At the time, t
Electronics Forum | Tue Aug 25 20:44:16 EDT 1998 | Peter
We haven't built these yet. The customer was in layout at the time and I was looking for any flags from others to determine if I should have them change the layout as I've not seen this before. From your response and others that I've received, it s