Electronics Forum | Thu Mar 22 13:57:47 EDT 2007 | chris
I would recommend checking out the stereo microscopes from Vision Engineering (www.visioneng.com). We have used the older and newer style Mantis scopes and our assemblers love them as you can do rework in a very natural and comfortable seating posit
Electronics Forum | Tue Mar 27 15:18:19 EDT 2007 | jmelson
Chrisw said : We have used the older and newer style Mantis scopes and our assemblers love them as you can do rework in a very natural and comfortable seating position. It took me a while fooling around to get everything in the right place, but I c
Electronics Forum | Sat Mar 24 03:06:55 EDT 2007 | aj
Hi Mika, We came across some difficulties with this type of device a couple of years back . After the proto run we needed to touch up the outside fillets to get stability and product to pass test. ( even though the manf. stated that there is no fill
Electronics Forum | Thu Apr 05 23:27:37 EDT 2007 | mika
to pad on the PCB. The pick & placement as I mentioned before is OK. Now our X-Ray machine cannot see if the joint is firm whitin the PCB-pad and the LGA-pad. So I still don't know if this "gonna work" in a long term...The customers of ours doesn't
Electronics Forum | Tue Apr 03 00:37:51 EDT 2007 | grantp
Hi, I think the only solution would be to contact Fuji and ask if there is an interface to the machine to write software for it. I read somewhere that FujiTrax allows a IT system type connection which software could be written for. Another solution
Electronics Forum | Wed Apr 04 18:25:07 EDT 2007 | darby
Don't think much of the people who run the line do you mate? "BUT is operator dependent, so if he feels lucky just change the reel without verification and machine will not stop if he didn't follow the procedure having a high probability of Wrong co
Electronics Forum | Thu Mar 29 03:13:15 EDT 2007 | Base
As far as I know you can still get support on the regular and the X-type Emeralds. Apart from the operating system the differences are not that big between those and the X2-type, I think the output and accuracy would be better and maybe there's some
Electronics Forum | Mon Mar 26 08:52:19 EDT 2007 | realchunks
Hi J, Yes, we do too. Funny thing is I was just looking at this last Friday. We call it sharing the bottom of the barrel. Typically it's just Process Engineers stuck down here, but from time to time, Maintenance gets stuck down here too. When in
Electronics Forum | Tue Mar 27 10:38:04 EDT 2007 | johansenng
Hi, sorry but i am new in this. This is a Freescale SRB ZigBee node schematic design. 1)Can anyone help me identify what is the use of the 10K ohm resistor (R115) used? Seems that there is some advantages and disadvantages of using it. The source is
Electronics Forum | Thu Mar 29 08:46:23 EDT 2007 | realchunks
Well I DO KNOW! Hi aj, 100% on the lead pads and 50% reduction on the center pad if you do not use thermal vias. If you do use thermal vias, you may need to increase the amount of paste needed, but not by much. 50% will be a good start. After re
.png)
