Electronics Forum | Fri Nov 04 13:24:30 EDT 2011 | tombstonesmt
Peelable masking has been our solution here recently. We an automovite customer that requires coating on both sides of the boards with many keep out areas. We are currently building a dispense robot that will apply tech spray wondermask 2218. The won
Electronics Forum | Fri Apr 27 08:02:18 EDT 2012 | jim_n_hky
We are in a similar situation with high mix low volume production. We are also using lean principles and the one piece flow mantra is always the target. In our plant though, we have not been able to achieve it. The guys who want one piece flow mostly
Electronics Forum | Mon Apr 30 13:45:11 EDT 2012 | rway
JimnHky is pretty much spot on. We have a high mix low volume line of products (most anyways). We have experimented with lean quite a bit, and have achieved single piece flow on our most voluminous product. In fact, this is where I would recommend
Electronics Forum | Thu Nov 03 16:47:52 EDT 2011 | hegemon
You need to define what it is you are inspecting for, and more importantly, what benefits you are trying to achieve with your acquisition of the technology? Inspecting post placement, post reflow, or both? Solder Joints? Through Holes? Part numbers
Electronics Forum | Fri Nov 18 12:06:09 EST 2011 | rway
Do a search for AOI on the forum. This question has been asked many times and there is plenty of information available on this forum to help you come to a good conclusion. We have two YesTech M1 systems. With most of the posts that I have read, th
Electronics Forum | Wed Dec 07 08:57:19 EST 2011 | edmaya33
5K with perform Head is amazing.You just need to make sure that during debug mode, the score should be 90%. Polarity, position, bridge, flip/tombstone/billboard, present/absent and solder condition ( and even OCR/OCV )is remarkable. Acceptance level
Electronics Forum | Thu Nov 03 16:59:00 EDT 2011 | hegemon
Most in the forum with AOI experience would say that Mirtec and Yestech as pretty close. If you have Yestech representation but no Mirtec rep, your question is basically answered. Regardless of the machine you purchase, you WILL require assistance fr
Electronics Forum | Wed Nov 09 05:12:43 EST 2011 | bobpan
Motor error 4 is an error that is caused by the machine not reaching a position in a timely matter. Usually its in the x/y axis but also could be z. If you have cleared the mod codes (function 35 shift 7) the machine should home. Usually this problem
Electronics Forum | Mon Nov 07 19:33:10 EST 2011 | swag
We have four pick and place machines all exibiting a residue that seems to build up over time on wiring and electrical components. This residue appears as a white haze on wiring, caps and fuses (these are the components where it is most obvious). Y
Electronics Forum | Sun Nov 13 12:26:23 EST 2011 | hasu
Hellou All, I am trying to figure out which one to buy, Miele 6002 or PBT Compaclean. Usage - washing assembled pcb's, app. 2500-3000pcs per month. http://www.mieleprofessional.co.uk/gb/professional/product/104_2987.htm http://www.asi-tech.co.il/?
