Electronics Forum | Tue Jan 30 12:03:15 EST 2001 | slthomas
Pete, I'm wondering how much optimisation you needed (or were allowed) to do with respect to connector design. The first one we evaluated had a row of leads that I can only describe as "crescent" shaped in cross section. Impossible to get even 50%
Electronics Forum | Sun Nov 23 20:37:36 EST 2014 | gregp
Hi J_Dub, thanks for the continued info...Of course selective soldering would be very time consuming for such a through hole assembly...but 18 minutes, wow...didn't realize selective soldering could take that long. I would like to know the approxima
Electronics Forum | Tue Sep 10 10:17:18 EDT 2013 | gregp
Hi Reese, Thanks for the feedback. So you have a fair amount of assemblies that are new designs with 10% through hole parts. Are these parts inserted manually? What is the soldering process?...wave solder?...selective solder? Do these components
Electronics Forum | Tue Sep 10 10:38:12 EDT 2013 | rway
Most of the PTH components are manually inserted. Some are auto-placed by our UIC machine. The parts are preped before install, so there is no need to trim the leads afterwards. The boards go through wave solder. The UIC machine has a clincher on
Electronics Forum | Fri Nov 21 11:00:27 EST 2014 | gregp
Hi J_Dub (Joe), Thanks for the input. Sounds like some fairly densely populated through hole assemblies. 100 solder joints per board is up to 50 parts per board (I know you may have DIP's so it could be less than 50). 24 boards in a panel x 50 par
Electronics Forum | Wed Nov 19 15:16:47 EST 2014 | warwolf
Interesting, see we used to do a large amount of PTH but we have been able to convert most of those parts to SMT now. the majority of our PTH is connectors. I am doing some research as to the types of through hole assembly that still remain.- This d
Electronics Forum | Fri Nov 21 12:12:44 EST 2014 | joe98375
On average there are about 3 parts per board that get hand placed (x24 is 72 parts per panel). One of these parts is a big 1W resistor that cannot fit on our axial machine. We also have a Zener Diode that needs to be hand placed because its leads are
Electronics Forum | Wed Feb 12 12:06:58 EST 2003 | dwanzek
I need some input on what good solder thieves dimensions should be. I am limited to solving my bridging problem with solder thieves; all process/wave variables have been adjusted to try to solve this problem. There are several of these connectors on
Electronics Forum | Tue Apr 16 05:05:32 EDT 2013 | stivais
We recently had a discussion with customer's QM - he claims that calculations for a proper solder wire diameter and soldering iron tip size (and temperature) have to be performed and documented for all manual (T/H) solderings (based on component size
Electronics Forum | Thu Feb 05 08:39:16 EST 2004 | davef
IPC-2222 - Sectional Design Standard For Printed Board For Organic Printed Boards, Table 9-3 � Plated Through Hole Diameter To Lead Diameter Relationships will give you the standard information you require.
