Electronics Forum | Thu Jul 23 19:04:24 EDT 2020 | robl
The modular inserters usually have them built into the feeders, which is part of why each feeder is so expensive. I'm sure I saw one system with a separate clinch unit but they are all dog slow compared to a rad 5 or 8 or 6241D+.
Electronics Forum | Thu Jul 23 19:13:24 EDT 2020 | charliedci
Yes, my research and feedback from one supplier in particular is that their feeders can preform, cut and clinch (although I'm not sure why you would need the clinch). We will be sending them a small kit to demonstrate to us (online) its capabilities
Electronics Forum | Fri Jul 24 02:56:45 EDT 2020 | wellmanrau
wellmanrau@yeah.net Email: wellman@htgdsmt.com">wellman@htgdsmt.com ; wellmanrau@yeah.net">wellmanrau@yeah.net Shenzhen HTGD Intelligent Equipment Co., Ltd. Website: http://www.htgdsmt.com" target="_blank">http://www.htgdsmt.com
Electronics Forum | Thu Oct 03 04:04:10 EDT 2002 | Bob Willis
SMTNet has a video tape and interactive CD ROM on Intrusive Reflow Soldering that you may want to check out. In addition there are some free inspection standards for pin in hole printing, placement and soldering available at http://www.dpmo-monitori
Electronics Forum | Fri Oct 04 12:02:53 EDT 2002 | mzaboogie
Hi Barry, One consideration that you may want to consider is the lead to hole ratio. The higher the ratio, the less solder is required to fill in the gaps and give you a fillet. Heat is a concern. You will need to ensure components will take the he
Electronics Forum | Fri Nov 21 11:00:27 EST 2014 | gregp
Hi J_Dub (Joe), Thanks for the input. Sounds like some fairly densely populated through hole assemblies. 100 solder joints per board is up to 50 parts per board (I know you may have DIP's so it could be less than 50). 24 boards in a panel x 50 par
Electronics Forum | Tue Sep 10 10:38:12 EDT 2013 | rway
Most of the PTH components are manually inserted. Some are auto-placed by our UIC machine. The parts are preped before install, so there is no need to trim the leads afterwards. The boards go through wave solder. The UIC machine has a clincher on
Electronics Forum | Tue Aug 11 03:27:10 EDT 2015 | iamera
Hello, I am new in this forum and also new in PCB manufacturing. now we have issued about silver open and short. we can detect this defect after auto check process and its to late to save our PCB. Is there any way to detect silver open or insufficien
Electronics Forum | Tue Jul 21 14:35:31 EDT 2020 | charliedci
Yes, we have an old Universal axial and they still offer independent machines for axial, radial and DIP components, but I do not have the floor space for that. Some offer "odd form" insertion machines (Juki, Hanwha, Cenncorp)which is the direction I
Electronics Forum | Sun Sep 15 03:29:58 EDT 2013 | sarason
I would be happy to add programing of the CS400 to my program PCBSynergy gregp. I have added about 80 SMT machine formats to the program to date. All built by reverse engineering. You only need to send me some example formats or better still your ori
