Electronics Forum | Fri Apr 13 12:37:35 EDT 2001 | edylc
>>> gold finger was covered by a Kapton tape and it was done offline away from the Screen printer or rather from the SMT lines itself, we are using an ENIG Pcb's , the process doesnt need a wave soldering ....however at the final end of the line ,
Electronics Forum | Tue Nov 19 15:18:28 EST 2002 | gswable
does anyone have concrete data on the reliability of lead free components-SN/Bi used with tin lead paste thanks
Electronics Forum | Tue Jun 06 19:03:59 EDT 2017 | zsoden
Hi Steve, I just confirmed with the manufacturer and the HASL is tin/lead (or it is supposed to be, at least). Any suggestions for how to test for nickel vs tin/lead? We're using an alcohol based no-clean flux from Alpha.
Electronics Forum | Fri Mar 23 10:00:38 EDT 2012 | isd_jwendell
I am a big fan of AIM SnPb solder paste. I currently use NC257-2 (no-clean, 89.5%), and recommend you include it in your evaluations.
Electronics Forum | Fri Mar 23 03:41:19 EDT 2012 | grahamcooper22
try Almit Sn62 HM1 RMA V14L ....its the best no clean lead paste for wetting...I sell it and it has solved wetting problems many times when users have used other pastes
Electronics Forum | Tue Jun 06 11:47:33 EDT 2017 | stevezeva
Hi Zac, was that board finished with tin/lead HASL or leadfree/HASL? Also what type of flux were you using? Just because a board is fresh out of sealed packaging doesn't necessarily mean that it's going to solder well. The picture that I've attached
Electronics Forum | Thu Mar 22 13:06:50 EDT 2012 | smtmfgeng
Does anyone have any insight on alternatives to Indium NC-SMQ 92J solder paste for minimizing poor wetting on parts with oxidized leads (see datasheet here: http://www.dtsprocess.com/contents/articlefiles/6-SMQ92j.pdf). I am considering setting up a
Electronics Forum | Thu Aug 06 09:51:20 EDT 1998 | Bob Willis
This text may be of interest to any one with tin lead spots Guide to Solder Spots - A New Plague in Manufacture ? So what are solder spots ? They appear to be the next big problem in modern reflow assembly in fact in any process that involves solder
Electronics Forum | Thu Jun 08 23:26:28 EDT 2006 | Shawn Vike
We are a small company, reletivly new to doing our own SMT (1 year) and we are having an issue, I think. We manufacture many board with no problems, but we have one that constently defeats us. This particular PCB has ENIG finish, and we have had th
Electronics Forum | Sun Feb 05 09:49:11 EST 2006 | Cmiller
We have been using ENIG for 8 years as our primary board finish. We have not seen any issues with tenting the vias. We have used a number of suppliers. The ENIG from China does not seem to solder quite as well in general but only had black pad from o
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
.gif)
winsouce.jpg)