Electronics Forum | Wed Aug 06 16:35:31 EDT 2003 | Carol
This is an old topic, but keeps coming up. Solderability and reliability issues with SMT gold plated terminations when used with tin/lead solder paste/hassle finish PWB. I need to know which standard (mil, IPC, J-STD??) tells you all about the probl
Electronics Forum | Wed Aug 06 20:50:42 EDT 2003 | davef
Well, if it "keeps coming up", let's take a pass at keeping down. For: * Requirement that gold be removed from components, pads, etc. is J-STD-001C, 5.4.1 * Context of that requirement [J-STD-001C, 5.4.1] and 6 or 7 references are in IPC-HDBK-001.
Electronics Forum | Thu Nov 13 20:48:04 EST 2003 | davef
There a number of studies like this published by component fabricators. Many can be found on the net. For instance: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/Pb-free_Board-level_reliability_study.pdf
Electronics Forum | Mon Mar 30 07:41:06 EST 1998 | Earl Moon
| Hi, | We have encountered de-wetting issues with gold plated components( SMT LEDs ). | The problem comes and go and we yet to locate the root cause ( process, component or solder paste etc ). | The rest of the components on the boards are not havi
Electronics Forum | Wed Aug 04 16:49:24 EDT 2004 | jim_bob
Regarding Lead Free component finishes, vendors are zeroing in on matte tin plating as the finish of choice. What test are performed, to determine if a finish is "matte" type (vs. non-matte)?
Electronics Forum | Thu Aug 07 09:14:02 EDT 2003 | Carol
Thanks Dave, Much appreciated. Carol
Electronics Forum | Sun Apr 13 19:50:20 EDT 2003 | yukim
Hi, We are placing (+) & (-) terminals in SMT. We have just changed the plating of them: from Nickel to Tin (Sn). During the trial, we used the same reflow profile as before changing, and the solder seems different: a bit cold, with some solder paste
Electronics Forum | Thu Apr 17 10:21:53 EDT 2003 | davef
First thing to try is get the solder connection hotter. 210*C is just not warm enough for the 'high' tin content of this connection. Second, it's disconcerning that you don't have good plating on the pad or the terminal. Why can't your board suppl
Electronics Forum | Mon Apr 14 09:39:49 EDT 2003 | davef
Consider: * Sn has a higher melting point than Pb. So the liquidous temperature of this new, non-Sn63 is going to be higher than 183*C. What was the thermal recipe measured on this solder connection? * Next thing we'd do is take problem devices and
Electronics Forum | Tue Nov 11 12:49:13 EST 2003 | Carol
Could you direct me to a Standard or Study that has used this termination with 67/37 tin/lead solder please? I am looking for the recommended reflow temperature requirements and reliability issues for the completed product. We are receiving this type