Electronics Forum | Thu Aug 17 06:02:37 EDT 2017 | smeissner
Is anyone using an AOI machine for through-hole > checking? We have a need to check post-build on > some PCBs', but there doesn't seem to be any > obvious AOI solution. > > Is there such a beast > available? Check Goepel. They developed a Spec
Electronics Forum | Mon Jul 10 08:24:51 EDT 2017 | philc
Is anyone using an AOI machine for through-hole checking? We have a need to check post-build on some PCBs', but there doesn't seem to be any obvious AOI solution. Is there such a beast available?
Electronics Forum | Fri Apr 21 18:43:23 EDT 2006 | SD
Sorry, I have not read the article. However, I do have five years experience constantly tweaking an AOI system that ran ONE product! The strength of the machine was solder inspection. The biggest problem was component color variation and shadowing
Electronics Forum | Wed Oct 11 09:04:37 EDT 2017 | sumote
I am looking for a source of metal pins. The rough dimensions are 0.500” long, and 0.025” x 0.025” square. They will be soldered to circuit cards on both ends, so must be a solder able metal. No special needs in the strength area, i just need a good
Electronics Forum | Mon Jul 10 11:04:26 EDT 2017 | philc
We use a Mirtec MV-3L for SMT work, but now have a requirement for inspecting through hole boards. I am aware of many of the AOI machines for SMT work, but can't seem to find anything for through hole from a major (well-known) manufacturer. Any usef
Electronics Forum | Wed Nov 15 14:33:57 EST 2017 | nc_dan
We acquired a used ViTrox V510 AOI machine, our first AOI machine. The programming interface is quite a bit different from our Pick and Place machines so our current tech is not familiar with it. We read the programming manual and made some progress
Electronics Forum | Sun Nov 08 10:22:52 EST 2009 | doremi
Hi everybody, First of all, to have process under 100% control you should have AOI after every active process in the pcb assembly line : - Post printing (2D or 3D Solder paste inspection machine); - Post reflow; - Post selective(wave solder). It i
Electronics Forum | Fri Oct 30 19:47:46 EDT 2009 | bigdaddysoy9
I programmed Orbotech VT-8000 and VT-9300 for around 5 years also. We have been using VI Technology Vi3k3 machines for the past 2 years. I find them to be far superior to the Orbotech machines in every way. To be fair, the Orbotech models we used wer
Electronics Forum | Wed Jul 26 11:56:32 EDT 2017 | proceng1
We use our MIRTEC to inspect Thru hole axial components after they've come off of the Universal VCD machine. I just add them to the centroid data in Circuitcam and the operators program the images like any other part.
Electronics Forum | Thu Nov 04 20:49:58 EDT 2010 | eadthem
What software version and build are you using, and were you lucky enough to get a manual for it? How big are your moduals and what is your component density like? Setting up a MV3-L for IPC 3 will take a serious investment in time for a operator wi
winsouce.jpg)