Electronics Forum | Mon Oct 01 03:46:57 EDT 2001 | wbu
Have never heard of solderballs during rework using solder wire. Noticed the tendency to have little balls of flux with too hot iron and lots of solder used for shields or massive cables to be connected. Seems to me a question of believe if it does
Electronics Forum | Fri Aug 17 01:40:55 EDT 2001 | V.RAMANAND KINI
We are in the watch & clock Business. We have a Watch IC chip that has to be wirebonded using Ultrasonic aluminium wedge bonder. The wire dia is 1.25mil. The PCB is made of G10 Glass epoxy copper clad laminate. The copper thickness is 18 microns. The
Electronics Forum | Wed Dec 03 21:10:06 EST 2003 | Dean
ohm out a sandard 25 pin d-sub. Make wire diagram. do the same to the lsm cable. If same, use standard cable. If different, buy cable and solder lug d-sub connectors and make your own cable. couple hours work.
Electronics Forum | Wed Jun 27 15:11:54 EDT 2007 | bkgsmtnet
Does anyone have contact info for Cable/Wire Assmbly ...Preperation Machines...like wire cutting and stripping and terminal machines?? Handtools and semi automatic machines? Thanks B
Electronics Forum | Sat Dec 06 23:59:57 EST 2003 | Dean
If this is an LSM1 or LSM 2 I have both of these. I can check the cables if you like and email you a wire diagram. I would bet dollars-to-donuts that it is a standard 25 pin parallel cable. Let me know if your interested.
Electronics Forum | Wed Jan 04 11:45:05 EST 2006 | Jeff
Discrete wiring and flat ribbon cabling. Fairly simple cables (connectors include: DF-11, IDC, D-SUB), proper crimping is probably the most difficult concept. But unfortunately is often overlooked.
Electronics Forum | Wed Apr 17 03:37:29 EDT 2019 | mahammansoor
Hi, I work in a Cable and Wire manufacturing company. We are currently working on an order of Automotive wires that require strict RoHS compliance. What are the RoHS compliance strategies that we can implement at the production line (PVC and Copper
Electronics Forum | Mon Apr 11 08:27:10 EDT 2011 | leemeyer
I have had similar problems before where the machine will intermittently stop with a limit error. Reset the machine and away it goes. Replacing the ribbon cable that runs from the head (37 pin D-sub)has solved this problem. This cable gets flexed a l
Electronics Forum | Wed Dec 27 13:16:12 EST 2006 | Cmiller
You should be able to trim the crimp part of the contact then just solder the wire onto the terminal.
Electronics Forum | Thu Apr 18 22:43:41 EDT 2019 | jackwong1931
I agree with you
Buy and selling used smt，semi， Robot ,CNC and all used machines
Equipment Dealer / Broker / Auctions
DONGGUAN HUMEN
Dongguan, 30 China
Phone: 13560819457
