Electronics Forum | Mon Sep 21 01:57:55 EDT 2009 | kaz
Hello All, My first visit here. I own and operate a small Industrial & Consumer Electronics Service Shop. There is more and more modules with high density fine pitch SMDs that we cannot handle. We bought PACE ThermoFlow BGA SMD station with a bunch o
Electronics Forum | Tue May 29 05:00:41 EDT 2007 | lococost
Grant, apart from troughput another thing to consider is boarddesign, If there is any SMD within a diameter (eg 3mm) of the connector you won't be able to solder them. I think those are the 2 main disadvantages of selective. That being said, for le
Electronics Forum | Thu Jun 07 18:09:21 EDT 2007 | stephan
We noticed unsufficient soldering on some 0805 chips located between pins from a plastic bloc connector . All chips are soldered with 45� angle. Flux quantity , preheating , contact time and PCB quality was checked. Do you know any international stan
Electronics Forum | Fri Jun 08 07:45:58 EDT 2007 | davef
There is no standard for the spacing of components, nor should there be. We have a difficult time picturing your 0805 at a 45* to the wave and the safe pin, but we'd guess this spacing needs to be 10 thou.
| 1 |
