Electronics Forum | Mon Jul 20 10:23:29 EDT 1998 | Sherry
Hello friends.... Can someone please point me in the right direction... I will be needing the capability of forming/trimming QFP's on a very low volumn scale in house. So far I've only been able to find one manufacturer and that is Fancort Industri
Electronics Forum | Mon Jul 20 13:28:14 EDT 1998 | Chris Fontaine
We regularly form QFP's and FP's (pitches to 20 mil) and have experience with both Knight and Fancort equipment, however most of our experience has been with Knight. Knight Tool has been consistently good, and I've had some sour experiences with Fan
Electronics Forum | Mon Jul 29 10:31:54 EDT 2024 | carl_p
Reel Services
Electronics Forum | Wed Jul 24 17:15:11 EDT 2024 | SMTA-75390352
Does anyone know of any companies that can take a tube of parts and bend / form the leads and then place them on tape and reel? It's a fairly large part as well which I'm not sure makes matters worse or better. https://www.infineon.com/dgdl/Infineon
Electronics Forum | Mon Mar 24 17:26:39 EST 2003 | pjc
try http://www.electro-prep.com
Electronics Forum | Mon Mar 24 19:08:51 EST 2003 | rdr
You could always make your own manual bender with shim stock etc...
Electronics Forum | Tue Mar 25 10:58:46 EST 2003 | davef
The best off-the-shelf option is: Go back to your customer and have them relay-out the board. This will: * Reduce labor costs. * Improve reliability by lowering the chance of package cracking caused by less than optimal lead forming.
Electronics Forum | Tue Jul 13 10:31:16 EDT 2004 | davef
No, experience, but a couple of comments are: * Your 2mm leads are proabably not ment to be trimmed. Consider returning these and buying components with shorter leads. [We know, we know. You have to build this piece of junk right NOW!!!! B-)] * I
Electronics Forum | Mon Mar 24 11:09:43 EST 2003 | rdr
Excelta has some Pliers that may do this. I know that they have one for a 3-lead offset. You may try this number for more info. Ktec 18004685832 www.ktec-sys.com
Electronics Forum | Mon Mar 24 12:15:24 EST 2003 | zaxx007
Hi Kevin, Hepco makes a small unit called a Hepco 3000-2, with the right die set this should be no problem. The unit should retail for around $600.00USD, have a good day. Sincerely, Zack Schmad factory-automation@cox.net
.gif)
winsouce.jpg)