Electronics Forum | Mon Aug 07 09:21:40 EDT 2023 | cehlen296
Is there a possibility to pocket rout on CAM350. I can currently create a rout outline of a shape, but I need the inside of the shape to be routed too. Is this possible within the software or not?
Electronics Forum | Sat Dec 24 19:31:06 EST 2011 | dontfeedphils
I use CAM350 and I really like it. Nice software and fairly easy to use. Pretty nice for extracting XY Data too when your customers are just too stubborn to send you any.
Electronics Forum | Mon Dec 22 15:41:27 EST 2014 | benreben
why all people speak only the temperatur? the speed convoyor is very important too... with lesser zone of reflow you can lower the convoyor speed... but if i must speak about temperature and zone i think the minimum for solder all board in ROHS is 5
Electronics Forum | Thu Apr 26 16:53:11 EDT 2007 | bbl
If you're still looking and cost is a major factor. Celestica Toronto is selling a couple of GSM 1's in reasonable condition. They should do the job and there's tons of parts/feeders etc available in the used market. I think they're asking around
Electronics Forum | Mon Nov 02 09:44:21 EST 1998 | Michael Nguyen
Well my process is I'm running my belt speed at 3.50fpm and about 215 to 225 degrees top side. I got my main wave down to a little less than half the board thickness. I'm not using a hot air knife cause we thought it might create more of a problem th
Electronics Forum | Wed Mar 13 09:08:40 EST 2002 | stockley
It is a little bit sad that I know this - be prepared for some confusision - this is not as simple as it might seem. Something tells me that the calculation of the tolerances for the nominal dimensions is a little inconsistent. As I recall the defa
Electronics Forum | Sat Feb 15 15:01:06 EST 2014 | dexter11233
At my company we have to capture centroid data from gerber information on almost a daily basis, so tinkering and toying with quicker and easier methods of getting the job done are fairly common place with us. As stated by Richard Larue UniSofts cad
Electronics Forum | Fri Jul 23 09:01:36 EDT 1999 | Earl Moon
| HI Earl | Thank you for your answer. | Let me know you about the hot you mentioned | First of all, The rework machine is the BGA3500 (manufactured by 0.k international:U.S.A) | ��DESOLDERING HEAT :OVER 200��(CENTIGRADE),30SEC(CHECKED
Electronics Forum | Mon Nov 02 13:24:18 EST 1998 | Ryan Jennens
| Well my process is I'm running my belt speed at 3.50fpm and about 215 to 225 degrees top side. I got my main wave down to a little less than half the board thickness. I'm not using a hot air knife cause we thought it might create more of a problem
Electronics Forum | Wed Jun 03 13:50:32 EDT 1998 | Chrys
| Can anyone tell me if there is a reference for smt component height specs on the bottom side of a board, which will also go through wave soldering. A current design I am reviewing has tant caps(7343) and a crystal on the back side. Should I only b
winsouce.jpg)
.gif)
