Electronics Forum | Fri Jun 03 15:19:32 EDT 2022 | dwl
I don't recall thicknesses off the top of my head but brittleness becomes an issue more for gold plating then ENIG. .125 um should be fine. also, gold ain't cheap so its unlikely your PCB fab will get anywhere near the max tolerance. On the other e
Electronics Forum | Tue Aug 23 13:44:46 EDT 2022 | jojoled
Can anybody recomend a (LED-safe) flux removing/cleaning liquid, which can be used in ultrasonic cleaner in immersive application? After using one product I have been told, that none of the top suppliers of chemicals have this kind of liquid (subject
Electronics Forum | Thu Oct 20 16:11:08 EDT 2022 | cyber_wolf
I have no experience with the MY100. Personally, I'm not a fan of platforms where the PCB is not stationary. Mechanical feeders typically require more maintenance than electronic. Yamaha is one of the few I haven't worked with. It is my understan
Electronics Forum | Fri Jan 13 18:35:53 EST 2023 | stephendo
I think that the top secret part is mounted on a flex rigid board. And it only looks like it is a display with a ribbon connected to the yellow board. I think the yellow board and white board were made with the flex connection and the display mounted
Electronics Forum | Mon Nov 20 14:43:49 EST 2023 | proceng1
Before we purchased the printer capable of 1500mm stencils, we actually built a printer. We used a table top style where you squeegee by hand. Purchased longer tube stock and extended everything. It wasn't pretty and it wasn't fast, but it allowed
Electronics Forum | Tue Dec 12 15:16:22 EST 2023 | proy
Yes we are in alignment of thought on this. Deciding on a value point of keep/toss is always a challenge - availability also comes into play - but this has improved over the last year. This is a matter of - when you do want to keep - short tapes/part
Electronics Forum | Wed Dec 13 04:30:33 EST 2023 | ttheis
Are components that need to be trimmed available on a reel? A lead trimmer that cuts from a reel of TH parts is fast and avoids post trimming. We also tried a bench top lead trimmer and its a terrible process; sold the machine after the first day. Bo
Electronics Forum | Fri Mar 08 16:10:44 EST 2024 | tommy_magyar
Unfortunately no sample numbers. We are building our own products, not a contract manufacturer. We are monitoring AOI, RMAs and rework - this only started in the last couple of months, but top management inclines not to give a target as it may "upset
Electronics Forum | Mon Apr 08 17:27:36 EDT 2024 | kingkelvin
I found a 0.9mm hex tool - but if I adjust the indicators "all the way up" on the shaft I get all current ranges at 255 (so obviously too high on the shaft) but if I place it anywhere else on the shaft (slightly down from top, or all the way down as
Electronics Forum | Wed May 29 02:01:10 EDT 2024 | kumarb
No direct experience with these parts but to me, the air flow from top side fans are creating a wind tunnel that is causing the smaller parts to fly. Can you adjust the speed of these fans? Review the paste - review the component mount height. We fac