Electronics Forum | Thu Mar 18 08:23:33 EDT 2021 | robl
Yes, we did it with both the monitors (camera & normal). Used a BNC to VGA adaptor for the black & white camera.
Electronics Forum | Wed Oct 23 13:01:11 EDT 2019 | compit
I have a single-view camera on a Topaz-X machine. When I define a connector type element - it displays messages like in attached files. If I change the type to IC - no problem. There is also no problem when "learning&quot
Electronics Forum | Sat Nov 09 20:11:43 EST 2019 | richardcargill
I suspect configuration too. From memory, only certain heads are assignable as 'Fine'. Changing this parameter in the component data to Standard or QFP will most likely cure this as any head will accept those two options
Electronics Forum | Sun Nov 10 05:40:27 EST 2019 | compit
It turned out that only SF heads support "fine" mode, while FNC does not. Probably because above the FNC nozzle there is a "circle" rotating the nozzles, and in fine mode it can interfere with the reflection of the camera light - the element is lower
Electronics Forum | Mon May 13 19:47:37 EDT 2002 | bcceng
Mladen, I am in contract manufacturing using the regular Philips Topaz. I started with one now I have four, if market ramps up will be getting more. The Topaz regular can place 0201,BCC,BGA's,Micro BGA's and others depending on the configuration of
Electronics Forum | Mon Aug 22 20:51:32 EDT 2005 | Cmiller
I was told by Assembleon that a Topaz can not be fitted with a 54mm camera. Only the 45mm. The Emerald? or whatever the 4 spindle machine is called, is the only one with a 54MM camera. Is this not true? I am talking used Topaz, 1997 to 2000 models. P
Electronics Forum | Fri Apr 24 13:55:09 EDT 2015 | duchoang
- Clean nozzles. - Clean camera. - Adjust lighting. - Check tolerance level. Good luck.
Electronics Forum | Sun Mar 25 15:17:38 EDT 2012 | duchoang
I used Topaz x and X2 long time ago. I might be wrong, but let's check the thickness of components and the camera light recognizing setup for each part. (?). They may be too different to be optimized for simultaneously pick-up and place.
Electronics Forum | Mon Dec 14 02:56:26 EST 2015 | s_marius
Good Day for Everyone! TOPAZ XII can handle 6.5mm height components easily. Is it possible to mount 10mm? The problem is that the picked high component pushes away other placed high component. Camera alignment works well. Please share your experien
Electronics Forum | Sun Sep 25 16:02:59 EDT 2005 | mark
The calibration was ok. When i switch off the back camera and use front one everything is ok. Is it true that when Topaz use back line camera after checking the components the machine rotates the components 180 degree?. Mark \
