Electronics Forum | Mon Jun 16 19:16:28 EDT 2008 | duchoang
I am using TopazX2, placing 0603 caps with #72 FNC nozzles. Sometimes, there is solder splash around the caps, being blowed out by the nozzle (?) when it placed the part down. Any idea about the reason and solution. Thanks.
Electronics Forum | Tue Jun 17 15:00:36 EDT 2008 | duchoang
"The machine blows a slight amount of air after placement and it is probably adjusted too high. " Is that adjustable and how to do it on TopazX2 Assembleon Pick and Place Machine?. Thank you very much.
Electronics Forum | Sun Mar 25 15:17:38 EDT 2012 | duchoang
I used Topaz x and X2 long time ago. I might be wrong, but let's check the thickness of components and the camera light recognizing setup for each part. (?). They may be too different to be optimized for simultaneously pick-up and place.
Electronics Forum | Tue Jun 09 14:10:41 EDT 2015 | duchoang
Last time I used Topaz X2 was 5 years ago. Correct me if I'm wrong. There are some reasons: -Head dirty so machine thought there was nozzle on head already. -Nozzle changer/ Nozzle position offset. -Something jammed and nozzle changer can not go all
Electronics Forum | Mon Oct 29 12:44:33 EDT 2018 | robl
Hi Reckless, If it's a Standard Phillips Sapphire then no, they are not a beginner machine. The feeders have to be spot on and the machine requires a much longer service as they have 2 sets of 12 heads. Spares will start becoming harder to get soon
Electronics Forum | Mon Mar 05 22:31:43 EST 2012 | acsscott
Using the 72A FNC nozzles to place 3216 resistors, and 74F nozzles to place PLCC6 LED's. The LED's ar 5mm x 6.5mm x 2.4mm tall.
Electronics Forum | Tue Jul 18 11:16:33 EDT 2017 | svfeingold
Found it, it appears to be 15mm. I received a reply from K&S (Kulicke & Soffa) who support the Assembleon machines. They say they do offer full support and training. The support offer is $7,500 per machine for the first year, including: * Annual a
Electronics Forum | Thu Apr 28 07:52:25 EDT 2005 | Base
Just have a look at the archives and see what you come up with. There is a hell of a lot more trouble listed there on the Mydata stuff than there is on the Emerald or it's Topaz twin. User-friendlyness? The GUI on the NT-based Emerald (that would be
Electronics Forum | Thu Oct 11 12:37:27 EDT 2007 | slthomas
We purchased a used machine and can't get the block fiducial function to work properly (PCB fids work fine). I can teach them and the machine will use them but the correction is worthless. We first tried it on a 2x2 panel where the top two boards wer
Electronics Forum | Sat Apr 09 01:41:47 EDT 2022 | glasscake
Fixed it, had to go to another one of my gem x2 machines make a user account with admin permissions. Copy the line of code in the "VtOperatorDef.txt" file under d:system that specifies that user into the text file on my topaz xii. V #BEGIN,OPERATOR
| 1 |
