Electronics Forum | Wed Nov 15 14:33:57 EST 2017 | nc_dan
We acquired a used ViTrox V510 AOI machine, our first AOI machine. The programming interface is quite a bit different from our Pick and Place machines so our current tech is not familiar with it. We read the programming manual and made some progress
Electronics Forum | Tue Aug 02 15:05:38 EDT 2011 | davef
A couple of points: * Just a nit, 'screens' fell in disuse 10-15 years ago. Old habits die slowly don't they? * Yes, DEK and MPM each hold about 50% of the solder paste printer market and about 4 or 5 others hold the rest. SOLDER PASTE PRINTER EQUI
Electronics Forum | Tue Mar 09 09:01:28 EST 1999 | Nancy
Dave, Thanks for the information. If I ever have to do that again I will be prepared. We are looking to set up a SMT automated line in house so hopefully I won't need it. Nancy | | Clarissa, | | | | Dave had good suggestions. We load several bo
Electronics Forum | Tue Mar 23 04:07:44 EST 1999 | Scott Davies
Rob, We are also using intrusive reflow to simultaneously process SMT and Thru-hole components. Our arrangement goes as follows: - Screen print solder paste to the single sided PCB using 0.008" laser cut stencil. - Apply adhesive dots to selected
Electronics Forum | Thu Mar 25 14:00:45 EST 1999 | Bob Willis
| Rob, | | We are also using intrusive reflow to simultaneously process SMT and Thru-hole components. Our arrangement goes as follows: | | - Screen print solder paste to the single sided PCB using 0.008" laser cut stencil. | - Apply adhesive dots
Electronics Forum | Fri Oct 26 11:29:41 EDT 2001 | kaopsahl
I have two DEK 288s set up in our shop, we used to use a Fuji GSP_III. I could not possibly say enough good things about the DEKs - they are incredible. The only real complaint I have with them is that if an error pops up that locks up the software -
Electronics Forum | Thu Aug 26 00:27:45 EDT 2004 | valuems
There is so much confusion about this cognex not reconized statement, and it's time to step in. The box on the out side is a cognex 2000 system. The reason for the cognex not reconized statement is very simple. MPM wrote the 4.1y software looking
Electronics Forum | Mon Mar 30 11:39:46 EDT 2009 | rgduval
Is this a sample board that you ran without components? If so, I'd get it back to your board house, and ask them to explain to you what's happening. We never did get to a satisfactory root cause on our issue (at least, satisfactory to me). It seem
Electronics Forum | Thu Oct 04 00:14:21 EDT 2018 | gaintstar
Flason SMT universal products: http://www.flason-smt.com/product/Touch-screen-Manual-stencil-printing-machine-solder-paste-printer.html http://www.flason-smt.com/product/Universal-8mm-CT0892-Feeder.html http://www.flason-smt.com/product/Universal-Gen
Electronics Forum | Wed Sep 17 11:13:06 EDT 2008 | daxman
You had mentioned that your volumes will be low? How about the mix? will you be changing over to different products a lot? How many different products will you be running? Will feeder setups be done by the operators or will you have a another departm
