Electronics Forum | Tue Aug 18 10:17:15 EDT 2009 | grantp
Hi, You don't need X-ray and all that crap. I would get an old MYDATA TP9 or something like that, and a manual stencil printer and a batch oven or a small inline oven. Should do the trick and be very low cost. Should be simple to use as well. Tha
Electronics Forum | Mon Aug 05 17:24:16 EDT 2013 | jorge_quijano
Hola Valeriy Not sure how the S15 works, but on the S20s & F4s there is a file on the C:WindowsSystem32driversetchosts that contains the Machine controller IP address & the Line Controller IP address, hope it helps. Saludos
Electronics Forum | Sat Jan 29 05:43:51 EST 2005 | Chua
Hi Chunks, Thanks for your input. Appreciate you could send me a copy of your evaluation list as this type of evaluation is new to me..... Here is my email address :- pgchua@cyberway.com.sg Thanks.
Electronics Forum | Tue Jul 30 12:47:56 EDT 2019 | davef
Ameen: Send me your email address by selecting the link under my avatar to the left. Thanks.
Electronics Forum | Thu Sep 19 04:21:11 EDT 2013 | spoiltforchoice
The budget is very small, if there is genuinely a saving to be had by moving this work in-house and away from subcontracting you should really be able to justify spending more. If you can't increase the budget maybe try shopping around for more compe
Electronics Forum | Mon Aug 05 09:16:39 EDT 2013 | valeriusx
Greetings. I'm having some difficulties in configuring 2 old SIPLACE Placement Machines - 80S-15 and 80F-3. They are already installed, there are no errors on machines computers, but I can't configure connection between these machines and the line c
Electronics Forum | Wed May 20 08:38:51 EDT 1998 | Jerry
We have had really good luck with the IIT version. We use it with a DEK265 also. I am having trouble coming up with a brochure but their email address is iit@ns.net. We have ordered probably 10 to 15 stencils for use on prototype builds. We have
Electronics Forum | Tue Mar 24 09:48:15 EST 1998 | Steve Schrader
| Do you know if there is an IPC standard or industry standard | that addresses the proper process for handling MSD's in the production environment....? (rework etc.) | Not the receiving area. | Thanks so much, | Robin Arnold | PCB Development | Har
Electronics Forum | Fri Apr 12 15:48:33 EDT 2002 | jersbo
SPC for each assembly(I use C(for board defects)NP(for unit defects) at the end of reflow to determine process capabilities determine Control limits. Once control limits are set, inspectors stop the process until out of control limit is addressed and
Electronics Forum | Thu May 06 10:52:08 EDT 2004 | John S
Many component manufacturers are moving to Pb free terminations. I've been doing a literature study of Pb free processing and have found several articles that indicate Pb-free paste with Sn/Pb terminations leads to early fatigue failures. Does anyo
.gif)
