Electronics Forum | Mon May 23 10:16:58 EDT 2005 | rlackey
Hi Grant, You'll need to move the nozzle changer on your machine if you want to run very big boards, it comes out quite easily. (It's single track & not set up for RAM or PTIF, no shuttle & standard handling) Cheers, Rob.
Electronics Forum | Thu Feb 22 22:57:59 EST 2007 | dekhead
What software version is running? Assumption it is running with FMI, what is UL protocol? Change UL protocol to "Manual", belt should not start running until board is placed over sensor, confirm! All products or just 1? What is board width of curr
Electronics Forum | Thu Feb 22 23:14:08 EST 2007 | vshan
v4.03 yes ul protocol under manual currently we are running with only one product Board width is 150mm
Electronics Forum | Thu Sep 06 01:12:43 EDT 2001 | Dreamsniper
Hi, What's the maximum track width that is allowed to be attached to a 0805 component land pattern. I have a 70 mil x 45 mil Land for my 0805 and is attached to a 50 mil wide track with a length of 300 mil to 1500 mil. Components affected are mostly
Electronics Forum | Tue Mar 30 12:10:31 EST 2004 | caldon
SMEMA is not just conveyor height. It also is Conveyor width, Edge Clearance, Tooling pins, Maximun Machine gap, and Lead in of conveyor. Additional, SMEMA is a machine communications Protocol for machine to machine or machine to conveyor communicati
Electronics Forum | Sat Dec 21 13:03:52 EST 2002 | V.RAMANAND KINI
Hi to all, All of us are familiar with the conventional way of making PCB...I mean...photo tools/expose/develop/etch/plate etc., These involve lots of chemicals and the work place is toxic. I have a small PCB with just two curves (circuit tracks)and
Electronics Forum | Thu Sep 06 10:58:49 EDT 2001 | davef
If your words imaged correctly, it seems a bit strange to have a trace that is wider than the pad where it connects, because we�re used to seeing a narrower trace connecting to a wider pad. It�s tough to determine what the designer was thinking abou
Electronics Forum | Wed Nov 23 19:50:23 EST 2016 | gmscribe
Hi guys, I'm working on a design involving a 223-pin BGA with 0.5mm pitch (ball size 0.3mm) with a 16-bit DDR3 controller involved. Currently routing a track between two balls is resulting in a track width of 0.1mm and a spacing of 0.077mm. Now the
Electronics Forum | Fri Jan 14 16:22:05 EST 2000 | JAX
The feeders that you are probably refering to are made by hoover-davis. They only have adjustable pitch( electronic ). You probably will not find a universal feeder that has adjustable width. This is because the guide track is positioned on the left
Electronics Forum | Fri Jul 01 04:15:58 EDT 2005 | pci
Hello I am looking for a best solution to make a prototype of Single sided and double sided board. Using Orcad. The line / track width are 8/8 mil. the hole sizes are 0.6 0.8 , 1.2 and 2.6 mm. The size will be approx. 175 x 130mm. Could you please
