Electronics Forum | Fri Jan 19 17:43:30 EST 2001 | davef
Intermetalic Layer (IL). A compound formed at the interface of two different metals, whose atoms have an extremely high natural attraction for each other, so high, that they do not bond to other elements by any other means. Also, intermetalic compo
Electronics Forum | Tue Apr 03 00:37:51 EDT 2007 | grantp
Hi, I think the only solution would be to contact Fuji and ask if there is an interface to the machine to write software for it. I read somewhere that FujiTrax allows a IT system type connection which software could be written for. Another solution
Electronics Forum | Wed Apr 16 19:17:11 EDT 2014 | hegemon
OK, POP already done, and you are mounting the POP device. You are seeing opens. Opens at the device/PWB? or opens at the device/device interface? Or possibly both? 'hege
Electronics Forum | Tue Mar 17 16:35:50 EDT 2009 | gregf912
Try switching pins 1 and 2 on the smema cable going to the CP6 machine. Fuji needs contact close then open to send/recieve boards.
Electronics Forum | Thu May 15 12:02:42 EDT 2008 | scotceltic
Japanese (He He) Good one Mark. I have NXT's and I know that the communication for the feeder size and pitch among many other data comes through across a Fuji Open Interface software. (Fuji proprietary software) We use this to talk to our part numb
Electronics Forum | Wed Sep 14 02:41:49 EDT 2016 | bukas
here is well explained SMEMA interface http://www.daghee.com/?p=326 so, disconnect printer from upline modules and check are any 2 of 4 pins shortened(should be pins No 1 & 2) while machine is ready state. when machine is in busy state the same pin
Electronics Forum | Thu Apr 26 02:32:44 EDT 2018 | bukas
1. check both e-stop buttons are released 2. reset e-stop with blue reset button 3. open Alarms menu(there is icon) 4. acknowledge alarms(next to alarms menu icon) 5. clear alarms(next to acknowledge alarms icon) 6. go back to operating interface(thi
Electronics Forum | Thu Sep 12 10:45:29 EDT 2002 | pbarton
We have used a laser cut stencil 0.15mm (0.006") thick with 0.3mm (0.012") square apertures radiused in the corners 0.06mm (0.0025") to aid paste release. This approach with the (type 3) paste we use has proven successful on thousands of devices plac
Electronics Forum | Tue Feb 20 07:31:45 EST 2001 | Nick L
0.076 ~ 0.2 um(micron) but our substrate gold thickness is between 0.3~1.2um. Is there any related to the plating process of substrate! And how can they control this thickness?(May be I should ask substrate vendor their controlling limit). If this i
Electronics Forum | Sat Sep 12 02:16:41 EDT 2020 | jmelson
Arrgh, that's an SFA-410ED camera, original subject was wrong. Hello, the down camera on my Quad QSA-30 has gone haywire. It still puts out video, but does not sync to the vision system, the picture rolls horizontally. I have verified the vision int