Electronics Forum | Wed Feb 07 13:41:20 EST 2007 | coop
I contacted philips/assembleon and they said it was 1,200 new I think we might end up going this route, I've stacked up old trays before, would rather not restrict the amount of feeders I can load, but you're right it will get yah by in a pinch. than
Electronics Forum | Tue Jul 07 04:06:59 EDT 2009 | smt99
I have never used Jedec trays before, what type of tape do you use to keep them together once stacked for packaging? Thanks all
Electronics Forum | Mon Jan 26 21:28:55 EST 2004 | Dean
If this is in regards to the manufacturing floor: I can remember years ago I had an Fuji IP3 + MTU4. Used square magnets to hold tray stacks square to the machine. Manufacturing manager told me they should not be used. Apparantly the magnetic fie
Electronics Forum | Mon Dec 05 09:14:14 EST 2022 | peterm
Invoke. The PTF Setup Procedure dialog box displays. 4. Select Product. The Select Product File dialog box displays. 5. Select the same product used in the Open PTF Teach Product section above. 6. Enter the Slot number for the PTF and select Full
Electronics Forum | Fri May 03 10:51:24 EDT 2002 | fmonette
Dave is correct. I am including additional information that comes from a recent posting on another industry forum : The proper guidelines for bag sealing are actually specified in the JEDEC standard EIA/JEP124 section 5.2.1 Packing moisture-sensiti
Electronics Forum | Mon Jun 21 07:48:23 EDT 2004 | BobL
Contact Jim Marquis at Kimchuk, Inc. (203) 790-7800. They are marketing a rack and stack product that allows you to store the pc boards flat. It is esd safe and eliminates damage from handling boards. I have been in electronic manufacturing for 20 ye
Electronics Forum | Wed May 03 02:23:11 EDT 2017 | Rob
Many years ago (20+) we did this by preassembling the 2 parts into a mini leadframe with high temp solder paste, which was a pain but then they could be dropped in trays, surface mounted and hit the line clean. I'm guessing you have a low value cap
Electronics Forum | Fri Nov 01 18:57:32 EST 2002 | slthomas
I guess I just don't see how it would benefit us any. We rarely remove a board from the conveyor unless it's coming out of an oven. And why would you put bare boards on a tray? Why not into a destacker that feeds your line, so only the edges of a
Electronics Forum | Thu Aug 04 14:44:59 EDT 2005 | Shean Dalton
Hi Sandy B, You certainly can clean the BGA's using an inline or batch process. The correct method to hold them during this process, is the method that provides the desired outcome. I'm familiar with the desired outcome for cleaning singulated BGA
Electronics Forum | Thu Jul 17 13:57:21 EDT 2008 | dphilbrick
The recommended bake temperature for components in Tape and Reel is 40C. If you use a bake temperature higher than that, the cover tape and other elements of the packaging will degrade to the point that it becomes impossible to reliably use an automa
.gif)
