Electronics Forum | Fri Mar 12 01:51:45 EST 2021 | proy
Resolved, the centrifugal pump seal (5/8th shaft) had failed and we were able to get a goulds replacement, back up and running in 2 days. Just FYI for anyone with similar problem in the future
Electronics Forum | Wed Sep 12 00:18:19 EDT 2018 | aqueous
Here's a link to an article regarding foam mitigation techniques. It my be helpful. There are many causes of foam. Water alone does not foam. Flux, solubilized in to the water can produce foam. Defluxing additives contain defaming agents which should
Electronics Forum | Wed Dec 05 18:19:39 EST 2012 | cnotebaert
You should talk to your paste/flux manufacture! They will provide the best instruction for this. The norm is typically 130-145f, speed 2-4f/m I always push for slower… the slower the cleaner/drier (in theory!), if you have an ICOM, Omega meter, ionog
Electronics Forum | Wed Dec 05 23:34:32 EST 2012 | aqueous
Typical conveyor speeds on leaded alloys and OA flux is 2 FPM. Typical conveyor speeds on lead-free alloys and OS flux is 0.5 FPM. Temperature should be 140 F. Most polypropylene inlines cleaners should not exceed 140 F. -Mike Konrad Aqueous Technol
| 1 |
winsouce.jpg)