Electronics Forum | Sat Dec 11 23:15:01 EST 2010 | smt_dude
My APS GF12 seems to have lost it's settings randomly last night, and it won't let me run any profiles unless it's autotuned. I've figured out the security password and can get into the tuning menu, but not sure what to do from here. Anyone know wh
Electronics Forum | Tue Dec 01 12:58:09 EST 2015 | ttheis
When ever I did an autotune the machine would start at 100F on all three zones, then after a long time it would bump up to 200F and finally 300F. It takes forever but eventually it would complete the tune process and be ready to enter work mode.
Electronics Forum | Tue Dec 01 17:40:45 EST 2015 | jackm
Thanks, Tom. I'll post with my results. It's been running for 2-1/2 hours now at the 100F setpoint. I may need to re-start the tuning tomorrow morning, since I don't want to leave it running at the higher temperatures overnight.
Electronics Forum | Wed Jul 03 06:52:27 EDT 2019 | bobpan
Seems to be fighting to hold its position. 1. Check for anything worn out...possibly idler bearing/pulley and/or the belt. 2. Maybe it could use servo tuning...this may help but usually servo tuning is not that critical. 3. Clean the scale and the
Electronics Forum | Wed Aug 02 02:02:12 EDT 2023 | ttheis
Of the few contract jobs that we ever took one of them was with smt pogo pins. Alignment was poor and most were crooked. Probably could have been resolved with less paste and tuning the process but customer was frustrated that their design ended up w
Electronics Forum | Thu Jul 21 14:05:19 EDT 2005 | cyber_wolf
Dave, I think I worded my post poorly. I am not sure if "tuning fork type" is the correct terminology. The instrument I am looking for usually has a hand held unit connected to a device that resembles a small tuning fork. As a matter of fact, I thi
Electronics Forum | Wed May 13 15:10:54 EDT 2015 | ttheis
Hi everyone, I just got a GF-12 oven that looks in good shape but it won't go into WORK mode because it needs to run a TUNE. I've read that this happens when the internal backup battery fails or after a specific time. A while back a member posted t
Electronics Forum | Wed Feb 23 15:07:58 EST 2005 | bobpan
Hello C.B. I am a former trainer/fse for that machine and still have a q1000 bible for fixing problems. I think the machine may need servo tuned to which there is a procedure that i would have to find. First thing to do though, is to drop the machine
Electronics Forum | Thu Apr 27 05:45:20 EDT 2017 | pavel_murtishev
methos1979, 1. Mirtec, Marantz 2. Koh Young, Orbotech, Mirtec 3. Koh Young Zenith 4. Definitely Programs for 3D AOI are prepared really faster. Having defined component database, programming takes no more than a couple of hours. Fine tuning takes u
Electronics Forum | Mon Aug 10 17:00:22 EDT 1998 | D.Lange
Must've fell asleep on the keyboard or something. That was not my response??? Guess we have to let our presence be known from time to time. Stay tuned next week for "The Song Remains The Same"! | Could you tell us more about the "Cinderella Story"?
