Electronics Forum | Tue Jan 22 22:23:48 EST 2008 | amarpreet41
Thanks, I am working on to prevent solder bridging. Tried fine tuning reflow profile, solder printing looks fine. Any further ideas??
Electronics Forum | Wed Nov 19 13:25:14 EST 2008 | slthomas
You should set up a tour of a respectable stencil manufacturer and take your boss with you. My guess is it'll change his tune immediately.
Electronics Forum | Mon Jul 27 20:35:13 EDT 2009 | michaellaw
This is the common problem for RH6 m/c.You need to check of the following: 1)Make sure the spiral corl is secure properly especially near to detection amplifier box 2)you may try to fine tuning the sensibility VR on the detection card. 3)change the t
Electronics Forum | Sun Jul 11 21:10:27 EDT 2010 | fujiphil
First, check the sensors for 17th and 19th station....tune the sensor amplifier if necessary. Then, check the dogs on the nozzle holders... If the above, items are ok... check the 13th station clutch engagement. Calibrate if necessary... fujiphil
Electronics Forum | Tue Jul 13 10:51:55 EDT 2010 | muarty
Sounds pretty much like the sensors/amplifiers need tuned on your machine. It is a fairly straightforward exercise to do this. The sensors basically look at the back of the chucks to determine which nozzle is in the lowest position and therefore whic
Electronics Forum | Tue Jul 13 21:05:04 EDT 2010 | dman97
Thanks for the replies. Indeed the amplifier needed to be tuned. I have recalibrated it and all is working as it should. Thanks for the advice.
Electronics Forum | Thu Dec 09 12:23:07 EST 2010 | atiya124
Can someone tell me in detail How to fine tune the Gullwing when you create a program for 5 DX X-ray machine.
Electronics Forum | Mon Dec 05 20:44:14 EST 2011 | littlebone
Anyone try Cyberoptics SAM technology before? My company do not have so many talent engineers to handle algorithm tuning :( What to do?
Electronics Forum | Wed Apr 27 08:41:03 EDT 2011 | cbeneat
Larry, The early results are in and turning the fixture, as you recommended seems to have fixed the problem, I want to thank everyone for their input, if this turns into another temp. fix I'll be back. Stay tuned!
Electronics Forum | Thu Dec 10 13:53:06 EST 2015 | ttheis
Hi David, I posted the password a while back; I believe it is F1-left-down-right if I recall correctly.
