Electronics Forum | Sun Feb 27 17:08:37 EST 2005 | //jh0n.
We're using 10MPF nozzles to pick 0603 components. I think I have noticed, that it does overlap. Is 08MPF the proper nozzle? These are also the only nozzles that I've had problems with - so this is probably the case.
Electronics Forum | Sun Feb 27 17:12:03 EST 2005 | //jh0n.
Thanks for the reply. Like I just posted to the other replier, this is only a problem with 10MPF nozzles picking 0603 components off 8x4mm feeders. Feeders are all taught properly, and pick position is usually off by
Electronics Forum | Thu Mar 02 13:29:30 EST 2006 | russ
6 mils maybe? instead of 6mm? We go down to 5 mils and up to 7 with 0603. You could even use a 4mil stencil for these without any problems. The .2mm (.0078")apart however might get you in trouble unless your equipment is rock solid.
Electronics Forum | Wed Dec 03 11:35:15 EST 2008 | wrongway
We have an ac30l advantis machine with a lighting head for about a year now we place a lot of 0603 parts some from vishay we are not seeing this problem yet
Electronics Forum | Sat Jun 19 00:49:17 EDT 2010 | mun4o
Hi all, lately ofen I have problem with cracked ceramic capacitors.We use 0805 and 0603 cap. Samsung.ICT measure diferent capacity of nominal.If I tray to desoldering component , then component cracked.I think , that the reason is the moisture in com
Electronics Forum | Fri Dec 15 05:02:42 EST 2000 | SaiWong
It is not gonna work. Even though you fine tuned the CP3. 0603 is the maximum. The camera design is only for the 0603 maximum. If you use it for 0402. I think at least 60% of the component are gone. Also, there is no 0802 feeder for the CP3. How can
Electronics Forum | Wed May 24 16:12:40 EDT 2006 | PWH
Hey you FlexJet users out there... We just bought a new Universal machine with a FlexJet head on it. Excellent machine. However, I'm still in the learning stage and having a little trouble with 0402's and 0603's (caps mostly but resisters as well)
Electronics Forum | Wed May 23 14:54:50 EDT 2007 | andras
Not at all Jon. I have been using my CSM66 for 2 years and I think it is a very stable and abiding machine. It can place 0603 and 0.65mm pitch SSOP without any problem at 3000-3600cph. Easily and cheaply maintainable, so good choice for a "garage-wor
Electronics Forum | Tue Oct 02 13:55:12 EDT 2012 | ericrr
OK I can take a hint when asked for a photo. I did not try to take a photo as I thought the close up image would put the picture out of focus, so this is where a bit of graphics works might help explain the problem. When I had a look at the 1206 p
Electronics Forum | Mon Sep 19 01:57:28 EDT 2016 | shriram
Hi guys, Problem: Mid chip solder balling. Component affected: 0603 caps only Defect is PCB specific (Meaning only one PCB is affected as the aperture is standard for that component). As a containment I'll give a home plate design for the compo
