Electronics Forum | Wed Jan 31 14:58:13 EST 2007 | pr
Is it the same nozzle every time? I would check that the shaft is hitting dead center (it could be binding)on the nozzles (especially if it only happens on 1 nozzle). Also check the rollers on the shaft (that hold the nozzle) and make sure they line
Electronics Forum | Fri Aug 31 07:42:05 EDT 2007 | geb
Hi, This is for a Universal GSM1. Is there a way to make a nozzle rotate to the same point before picking the next component up. It is because we are trying to pick & place a rectangular component (Luxeon Rebels) with a rectangular nozzle. The nozzl
Electronics Forum | Wed Oct 12 08:02:31 EDT 2011 | emeto
It looks like a nozzle size issue. Make sure you have the right nozzle size for the part as well as the right feeder.I think that if the machine takes the parts from the feeders, it can't be feeder problem. Usually parts will jump out of the feeder
Electronics Forum | Thu Nov 03 11:31:51 EDT 2022 | proceng1
You described cleaning the spindles and filters, but did you clean the nozzles? Perhaps you got some paste on the nozzle. Also, did you perform the vacuum and blow off testing? Make sure your solenoids are working properly. Is it all 6 heads that
Electronics Forum | Fri Dec 04 18:20:26 EST 1998 | Ralph F
Does anyone do an incoming inspection of Fuji CP Type nozzles? Or, do you have a nozzle qualification program?
Electronics Forum | Mon Sep 14 11:45:08 EDT 1998 | John McMasters
Has anyone used Fuji's rubber tip nozzles for the IP3? Are they O-ring type or suction cup? I'm having trouble picking up Ompacs due to the top of the part not consistently being flat. Any actual experience with these $1100 nozzles would be appreci
Electronics Forum | Fri Dec 19 09:35:39 EST 2008 | ronniewong
We made the best nozzles. We made all types of nozzles in Singapore, contact us avipre@avipre.com.sg, http://www.avipre.com.
Electronics Forum | Wed Dec 07 18:16:27 EST 2022 | skolev
Hi everyone. I have little problem finding the right SMT nozzle for my new custom machine . For manipulating custom component with dimensions close to passive element 0402 . Now in machine i've put a siemens SMT Nozzle . But there are some problems
Electronics Forum | Tue Sep 10 19:08:59 EDT 2002 | cp743
Brian, I believe that someone has given you incorrect info. Both of these vision types ignore protruding nozzles during vision processing. I am currently running 1608 components with a 1.0mm nozzle on a CP-643E series machine utilizing vision type
Electronics Forum | Tue Mar 06 23:50:09 EST 2012 | vinitverma
Hi Scott, Change the nozzle type to Type 73 for the LEDs and you'll find it's ok. I just tried it and with Type 73 it picked up the Cap and LED in a single shot but with Type 74 it went for 2 charges.
