Electronics Forum | Fri Mar 17 09:03:52 EDT 2017 | daleb
Hello New to forum, I have a mpm ultra print 1500 can not find a lube coupler for the Z axis slide bearings. Does anyone know what it is and where could I find one. A standard grease coupling does not fit. Thanks Dale
Electronics Forum | Mon Mar 20 13:49:21 EDT 2017 | pjc
That's a U.K. machine, so the zerk fitting is not standard to USA. You can replace it with a standard, like from Grainger: https://www. Grainger.com/category/grease-fittings/ecatalog/N-14rvZ1z0do6q MPM can't help as that machine is obsolete, but PPM
Electronics Forum | Tue Mar 28 19:56:47 EDT 2017 | aemery
Dale, Be very careful about putting to much grease into this actuator. It is kind of a sealed unit. If you were to take this actuator apart you would see that the motor drives a heavy pitched threaded screw. As it turns it causes the threaded tube
Electronics Forum | Fri Nov 08 14:19:59 EST 2019 | dwl
You can try putting titanium stiffeners on the PCB to prevent it from warping. How thick is your stencil? More paste would give you a wider window however too much and you risk bridging. You could try over printing the pad at the heel and toe to get
Electronics Forum | Wed Jun 23 22:18:51 EDT 2004 | PCA
Does any one have a copy of the error diagnostic code listing for this machine?
Electronics Forum | Thu Jun 24 13:24:18 EDT 2004 | pjc
Contact Sigmaprint for the error code list. www.sigmaprint.co.uk
Electronics Forum | Mon Feb 13 01:47:28 EST 2017 | soldertraining
Solder flux and solder paste deposition is a standard step during the chip attach and sphere attach portions of BGA and CSP assembly. A technique called ultra-violet fluorescence intensity mapping (UV FIM) has been introduced that allows flux measure
Electronics Forum | Thu Oct 08 22:32:58 EDT 1998 | Dave F
| | | | I am trying to find out, what possibilities I have, to print solder paste on a board, when the task is to have 120 Microns thickness for the biggest part of the board (85% of the real estate), and then have 250 Microns of thickness on the re
Electronics Forum | Thu Oct 08 03:27:00 EDT 1998 | Thomas Blesinger
| | | I am trying to find out, what possibilities I have, to print solder paste on a board, when the task is to have 120 Microns thickness for the biggest part of the board (85% of the real estate), and then have 250 Microns of thickness on the rema
Electronics Forum | Wed Oct 07 14:28:25 EDT 1998 | MMurphy
| I am trying to find out, what possibilities I have, to print solder paste on a board, when the task is to have 120 Microns thickness for the biggest part of the board (85% of the real estate), and then have 250 Microns of thickness on the remainin
