Electronics Forum | Tue Jan 29 22:01:51 EST 2008 | davef
These test are largely useless. Check the fine SMTnet Archives for previous rants. Manufacturers of machines to use are: * Peel tests: Instron [Instron Worldwide Headquarters; 825 University Ave, Norwood, MA 02062-2643; 800 877 6674 http://www.inst
Electronics Forum | Thu Sep 02 16:12:51 EDT 2004 | Mike Konrad
Hi -K We are a manufacturer of ionic contamination testers (not yours). In most cases, automatic mode is appropriate. In some instances however, you may need extra time to �release� entrapped contamination from the sample. Automatic mode is not a
Electronics Forum | Tue Apr 08 09:56:58 EDT 2008 | slthomas
Is it a factory (Universal, Panasonic, etc.) holder or aftermarket? We used to use Fancort holders on our Universals and they're definitely still around.
Electronics Forum | Wed Apr 09 03:21:36 EDT 2008 | fnorradd
Hi Steve, The adjustable workboard holders are a mixture of universal and aftermarket, they do not use the clamp down arms which were originally with the universal pbs holders, they are the type which have two grub screws holding the clamps to the h
Electronics Forum | Wed Oct 16 01:02:27 EDT 2024 | lukejk95
Hello, We have a Radial 5 machine from Universal Instruments and every time I turn the Interlock Bypass key to disengage the Interlock Bypass and run at full auto, my machine will act as if a cover or an interlock is not being made. All 13 covers ar
Electronics Forum | Mon Mar 15 15:47:51 EST 1999 | Steve Schrader
| Are stencils universal from one printer to another? We are looking into the possibility of going from Solderprint 1414 manual printer to a more automated printer. We are also considering bringing some boards we currently outsource in house. I w
Electronics Forum | Fri May 11 07:38:14 EDT 2007 | tombr
It is possible to vary the length of lead during auto insert. However, it requires software and mechanical adjustments. Universal equipment allows small changes via software program for lead length. To change angle of clinch involves a mechanical a
Electronics Forum | Fri May 07 22:27:41 EDT 1999 | Big K
My company has a product line that utilizes multi-up PCB's. In order to cut costs for this product line, I have been asked to look into ways of running panels that contain bad blocks. Our SMT equipment is quite capable of doing this, but I need to k
Electronics Forum | Mon Jan 12 17:00:43 EST 2004 | karkanov
Hi, We maybe buy a MPM AP25hie, and the guy who sold the printer told me about a Dedicated tooling and a Universal Tooling...I not quiet sur of what is that, can someone explain it to me and what is the best option. Just for fun are you ready t
Electronics Forum | Tue Jan 18 11:11:02 EST 2005 | JB
I don't think the light levels can be adjusted manually. Two options that I know of, back ltg and front ltg. If you have auto teach mode, switch between this two. If the bottom is clear use back ltg on a square mold. Hope it helps.
