Electronics Forum | Wed May 31 10:05:43 EDT 2006 | dwelch123
Did you get your answers? If not you can call me at 941-758-3340. Ask for Dennis Welch,,, I've got all your answers but to lengthy to type out.
Electronics Forum | Fri May 26 10:59:56 EDT 2006 | James H
I have a panel with 4 boards on it. All boards have the same orientation. Is there a way to set up an offset to make the program more efficient? I also have a few panels with a couple bad boards on them. Is there a way to set up the program to reco
Electronics Forum | Fri Mar 02 11:26:17 EST 2007 | ausajid
hi thank you very much for your advice. there was only one option i beleive that should work, i have tried that option today, but still the machine goes to the alternate carrige instead of alternate feeder. the option was in operation mode, alternat
Electronics Forum | Thu Mar 01 11:22:17 EST 2007 | ausajid
hi is any body very good in programming for hsp4796a or hsp4796b. i am stuck in one thing and want any body to help me out. the problem is i am using alternate feeder alonghwith alternate carrige. i want machine to go on alternate feeder first and i
Electronics Forum | Thu Mar 01 18:24:37 EST 2007 | jaimebc
Set FEEDER AXIS in the box of the label ALTERNATE MODE at the OPERATION DATA display. ( to get there go to PROGRAM EDIT/OPERATION DATA/ then press next page. For reference look in your operation manual 3.7 ALTERNATE MODE.
Electronics Forum | Thu Mar 01 19:23:41 EST 2007 | SWAG
I could be wrong but I think the use for alternate feeder axis is a way of stopping the carriage so it does not always return to home every time an error condition exist. Saves on time and wear and tear on the machine. As for alternate carriage, I
Electronics Forum | Fri Mar 02 11:32:06 EST 2007 | ausajid
hi thank you for your rely. i think you are right. but there may be an option. i have ask from universal people the other day. they said, they will check from their engineers/highly qualified people and than reply. let see what they suggest. thank
Electronics Forum | Wed Oct 20 11:19:36 EDT 2004 | jax
The HSC, "Lightning Head", is offered on two platforms, Genesis and Advantis. The decision will depend on your throughput needs and price requirements. In comparison to the HSP, I would recomend the HSC. With the ability to use docking feeder carts,
Electronics Forum | Wed Oct 20 15:05:30 EDT 2004 | vickt
18"x24"), Low to high placement count, and need for Modularity tends to lead toward HSC Higher volume, High placement count, Lots of feeder capacity, established horizontal turret solution are all strengths for the 4797 HSP Of course there is overl
Electronics Forum | Mon Dec 12 09:56:07 EST 2022 | peterm
Feeder Teach. Then it's the "Slot X,Y feeder teach" in the pulldown menu. That should be the default one, set feeder slot and the PTF as your feeder. If in doubt you can always make a back up in the feeder database as well. Probably a good idea eithe
