Electronics Forum | Fri May 31 15:18:03 EDT 2024 | poly
I'm thinking about making a custom nozzle for a hirose connector my UIC machines have trouble putting down correctly. I'm thinking of printing the nozzle from stainless steel or something else. Does anyone have a material preference for nozzles? I
Electronics Forum | Fri Sep 01 09:54:02 EDT 2017 | gsmx4321
I get a Timeout waiting for nozzle changer vacuum buildup failure every time I go to run my 1998 GSMx machine. The problems seems to be that once in a while (it seems to be random) the spindle does not line up exactly in the center of the nozzle cha
Electronics Forum | Mon Oct 13 09:22:14 EDT 2014 | rgduval
Deni, Thanks. I managed to do pretty much exactly that. I was able to get the changers to pop up, and check the vacuum on the nozzles. The first two nozzles are very well sealed into the changer (can't move them), but, the balance of the nozzles
Electronics Forum | Mon Jul 09 11:19:07 EDT 2007 | swag
I could be wrong but I don't believe that you can start with any empty spindles. If it picks up nozzles, you will end up with more than one empty changer hole which will not work for the vacuum that is required to remove the nozzles from the spindle
Electronics Forum | Thu Oct 23 04:30:24 EDT 2014 | garteaga
Hi Rob, We have a GSM2. We have had that error in several occasions. Assuming you have already verified your vaccuum is good for that spindle, the most common problem is that the machine configuartion is wrong. Match the nozzle on the head to the no
Electronics Forum | Thu Oct 23 09:40:31 EDT 2014 | rgduval
Thanks, George. Yep, we got through all of that. Then went to cleaning the nozzle changers, etc. Had a tech in the other day from the broker that we bought the machine from, and discovered that the problem in changer 4 is that we don't have any
Electronics Forum | Sun Jul 08 06:38:41 EDT 2007 | dilogic
We have an old GSM1 (I-block, USOS V1.4.14, two 4-spindle heads, changers between rails). When I configure machine so there are no nozzles on heads and changers are filled with required nozzles, except for one empty hole, machine won't pick up nozzle
Electronics Forum | Wed Jun 16 16:54:13 EDT 2004 | Vince Cook
Greg, Just to cover the formalities, I work for Universal, and specifically with the GSM Platform. The GSM with a 4 spindle head can place 0201s, however, there are a number of things you'll want to have, chief among them a 1 mil/pixel upward lo
Electronics Forum | Thu Aug 10 13:26:02 EDT 2017 | dleeper
In my past life, I worked at a CM that used Mirae "Meridian" machines Universal Instruments "Genesis" machines. The universal instruments machines were much, much faster. What sort of head configuration did your Advantis machines have? The 30 spindl
Electronics Forum | Mon Jan 19 09:07:45 EST 2015 | cotinc01
We can offer several nozzles to assist with the placement of 0402/0201 components in the four-spindle head. We offer the 06MPF along with custom ceramic tipped nozzles. Most of our standard nozzles for this head type are less than $125.00 each. Chec
