Electronics Forum | Fri Nov 25 11:55:22 EST 2022 | poly
So I'm attempting to run feeder teach for my platform tray feeder... but I've got no idea what first point I should teach is... normal is the end pin of the feeder but this is for the ptf conveyor... so I've got no idea. If I just teach each corner
Electronics Forum | Sat Dec 03 01:07:29 EST 2022 | poly
I've got access to the universal manuals / voyager but I haven't found a section that describes the feeder teach setup process, I can pick up the teach slug onto the conveyor and then get into feeder teach but if I teach the corners of the slug as t
Electronics Forum | Thu Apr 19 07:42:53 EDT 2012 | leemeyer
I just purchased a used Universal Instruments Boardflo conveyor model 5363. It looked like it would be perfect to connect 2 of my Quad 4c machines in line. it came with a SMPI to Smema converter box. I connected the box S1PL and S2PL to what I beleiv
Electronics Forum | Thu Sep 29 10:34:46 EDT 2011 | leemeyer
I recently bought a used Universal conveyor #5362I. All I need it to do is pass through boards from 1 machine to the next without operator intervention. The only way I can get it to accept a board from the upstream machine is by pushing the yellow bu
Electronics Forum | Sat Jan 22 16:39:26 EST 2011 | eadthem
Your typical high mix line would consist of, Stencil printer, 1-2 foot conveyor belt, fast PNP machine (say a universal 30 spindle turret lightning head), 1-2 foot conveyor belt, large/heavy part PNP (say a universal flex jet 7 spindle or 4 Spindle),
Electronics Forum | Fri Aug 03 12:11:56 EDT 2007 | gmoritz
Any experience with the encoders and ball screws that drive the stage? We are seeing a pretty large y-drift from the 'top' to the 'bottom' of the board during x-travel. I've tried to measure this using the teach function and the x-drift from the sm
Electronics Forum | Thu Aug 10 13:26:02 EDT 2017 | dleeper
In my past life, I worked at a CM that used Mirae "Meridian" machines Universal Instruments "Genesis" machines. The universal instruments machines were much, much faster. What sort of head configuration did your Advantis machines have? The 30 spindl
Electronics Forum | Tue May 28 08:55:25 EDT 2002 | pjc
Rick, Here is a piece written in, I belivee the April issue SMT Magazine: Binghamton, N.Y. Sanyo High Technology and Universal Instruments Corp. have renewed an agreement whereby Sanyo will continue to provide the HSP line of chipshooters sold und
Electronics Forum | Wed Mar 18 09:03:57 EST 1998 | Earl Moon
| Problem occurs because the glass transition temp for FR4 is lower than reflow temperature. Our company wrote an article which was printed in SMT magazine some years ago | that deals with this exact subject. Best way to deal with this is to use a ce
Electronics Forum | Mon Mar 16 18:15:32 EST 1998 | ETS, LLC
Problem occurs because the glass transition temp for FR4 is lower than reflow temperature. Our company wrote an article which was printed in SMT magazine some years ago that deals with this exact subject. Best way to deal with this is to use a center
.gif)
